开云体育

Ok, got a quick question (I hope).? I have a client where we are converting their system to a Crestron Home system.? To deal with the limitations of the Crestron Home box, we are using an old MC3 to trigger some devices (PROAMP to be specific).? Currently I have the program on the MC3 set up with the "Pyng Connection Configuration" module pointing at the IP address of the CP4-R plus a single "Pyng (Listen for Pyng Events)" module with two signals defined.? The problem is that when I pull up Pair Devices>Device Types>Crestron Wired and Wi-Fi>Ethernet and Wi-Fi, the Listen for Crestron Home Events does not come up.? Even after hitting the rescan button multiple times.? Both processors are on the same IP scheme and both can be pinged from the other one so I know they can talk.? Does anyone have any suggestions?

In case you are talking to multiple processors... I've never used it that way.

I'm not sure what you're asking specifically, although it would be rather straightforward to use some comparison logic as an extension to the above to achieve this.

--

I current do exactly what you are describing to check when an EISC is offline.? Been doing that for many, many years and never once have I seen where the oscillator stop working.? I think you will find you will have other things cause you issues other then this.

I have a slight off topic but somewhat related question for you all:
Why does a wired TP has option for multiple IPID masters?
In what cases would you use that?

I have noticed that the Ethernet Offline Manager is Super laggy, meaning it may take up to a minute for it to report that the EISC is actually Offline. What I've done is added an Oscillator in the first processor that sends a "heartbeat" pulse every two seconds and if the connection between the two processors is somehow broken I know about it almost instantly as the pulses stop coming in. My question is, have any of you ever seen an oscillator stop working? I need this to work reliably for many years.

Thank you,

BruteForceIsUnderRated, I found your previous post with fput command description. It worked for me. Thank you!

AMEN!!

what about when you want to have HH:MM:SS? you need to zero the seconds once you hit 60 sec, and start incrementing the minutes, etc.

If their CH5 components are any indication...I would MUCH rather just have an API/protocol documentation to CRPC than a CH5-MediaPlayer component that would be a nightmare to "skin"

Mmmmm...Typical...
Crestron Should then provide a *Working* model that could be skinned as desired...It's really crappy that they got us all excited about HTML5 and then did essentially nothing...
Thanks Nathan!

Never heard about fput.

So I can save .vtz into /NVRAM at the processor and then load it onto the touchpanel?

Do you happen to have an example of how to use this command?

On Fri, Apr 15, 2022 at 02:31 PM, dmostyka wrote:

If I put different .vtz files in /display/? can I specify which one to load?

No, and the vtz is deleted after its loaded.

The VTP MPO uses the CRPC protocol which isn't documented. You technically could create an HTML5 MPO like component, but you would need to reverse engineer the CRPC Protocol. I tried a few years ago to get any type of documentation on it from Crestron and was very annoyed after a few months and gave up.

I have to use TSW panels. If it was iPad it would be much easier(((

And I agree that the whole idea is very strange... But still.?

As I said I don't think it's good idea to have all these GUIs in one VTPro project. Quite often when I have even two VTPro projects open it unexpectedly closes. I assume because custom themes are heavy.


If I put different .vtz files in /display/? can I specify which one to load?

Hi Nathan,
So does the HTML5 MPO need to be made specific to each device to be controlled vs one MPO that interfaces to whatever device it connects to, that has the proper parameters??
I.e. Can an MPO be built to handle anything that Crestron approves for use with the VTP MPO?
TIA!

If client is set on using the TSW but have 3 different versions. I'm guessing for different users. You could create an Interface setup page that allowed end-user to select theme and interface configuration. In VTP, I would create a page for each Interface version and have subpages to match. Keep labeling consistent so not to be confusing. Have a Main page (1) for the configuration and based on selection will page flip to appropriate page with associated subpages. It will be confusing unless you stay organized in the VTP and Code. Good luck.

I think this is a bad idea... but if you really want to you can load projects from console by putting the .vtz file in /display/ then run `projectload`