ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Panel Join Numbers

 

Hey guys,

I just took over a project and the panel project I received is not what is currently uploaded to the TP. Is there a way to see what join numbers were assigned to the buttons?


Re: DM-MD6x1 - video is flickering

 

It sounds like a D cable issue.

How long is the cable run and are you near any sources of electrical noise?

Can you provide more information about the "flickering" though? Is it full-screen or just a portion of the video? What is the source when you are noticing the flickering? Is it common to all sources? If you send a low-res source (like composite video or a laptop with the resolution forced down to 640x480 or 800x600 or the like) does it still do it?

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Dave
Sent: Monday, September 17, 2012 8:45 PM
To: Crestron@...
Subject: [Crestron] DM-MD6x1 - video is flickering

Hi all,

I have a DM-MD6x1 and DM-RMC 100. I terminated the cables twice, both D & M and still the video is flickering. The audio is okay. Any thoughts?

Thanks so much in advance for your help.

Dave



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links


DM-MD6x1 - video is flickering

 

Hi all,

I have a DM-MD6x1 and DM-RMC 100. I terminated the cables twice, both D & M and still the video is flickering. The audio is okay. Any thoughts?

Thanks so much in advance for your help.

Dave


Re: OT - Things to do in NYC after Masters

 

Hi All,

I am in the process of putting together our third trip to NYC - our last was Jan/Feb this year and this one is in 7 weeks yesterday. I agree very with Lincoln, and add:

The Metrocards are purchased from select stations, but if you are going from NJ into Grand Central via rail (easiest way from where you will be staying for Masters) you can get them there, and grab a subway map too - it will be your best friend.

Take a Helicopter ride - will cost about $115 per person for 15 minutes, but well worth it. (go to viator.com)

If you like live music, we loved "Village Underground" (103 W 3rd) in Greenwich Village.

For an insane desert - Serendipity 3 (from the movie) (225 E 60th Netween 2nd and 3rd)

Alternative ice skating, much cheaper (and better IMHO) then Central Park - Bryant Park (42nd and 6th) which you can do walking distance from Central Station.

By the way the vault Heather was talking about in Grand Central outside the Oyster Bar (lower Level) is called the "Whisper Wall" and is very freaky - you can hear the person standing about 60ft away as if ther were beside you. Also the Oyster Bar serves the best New England Clam Chowder in NYC - for $6.50.

Hop On/ Hop Off sight seeing bus - but will be bitterly cold!. Deinately an extremely touristy thing to do. Get your tickets from Gray Line (1560 Broadway Time SQ or online graylinenewyork.com)

If you like Police history - the New York City Police Museum (100 Old Slip). Has a great Exhibit on 9/11 which is extremly moving. Walking distance from Staten Island Ferry terminal (Definately get straight back on - do not bother going to the Island)

Finally if you enjoy shopping - Macys Herald Sq (34th and Broadway) or if you have time, Woodbury Common premium outlets (Google them or go to the Gray Line for bus tickets from Port Authority).


Adam

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

(warning: Excessively long post follows)

My first "real" trip to NYC was my 3rd Masters and in the middle of January. I spent a lot of time (the better part of 4 days) walking around outside in ~18degree (F) temps and until I found darted into a dug store to grab a (ugly but useful) knit head thing my ears would go numb after about 45 minutes, but otherwise it wasn't too bad.

I've used my HHonors (Hilton) points cache to stay at a few properties on Manhattan. I'd pass on the Waldorf (not impressed by the location or service -- seemed to be riding on reputation) but the Hilton Times Square is possibly my favorite hotel in the US.

Decent sized, clean and modern rooms with good service and a great location (it's almost literally right on top of the Times Square/42nd Street MTA station and from there you can get anywhere pretty easily).

- I love MoMA and not the biggest fan of the Met but you should go at least once. The Cooper-Hewitt National Design Museum is also one of my favorites, though I don't know if they've finished their renovation project. The Guggenheim is also a NY landmark, but the exhibitions can be kind of out there. Definitely consider what's on display before deciding to lay down cash [if you have Museum Staff ID, though, make sure you show it at any of these]

- For Broadway, if you aren't wed to a particular check out the TKTS booth for discount tickets day of show. One of my favorite things to do is just go down there, and pick a show I've never heard of, or heard very little about and get a ticket. The tickets are usually pretty decent. But I've also been burned (Boeing Boeing and Next to Normal - Awesome; Fela - So far beyond awful I managed to get a partial refund.)

- Central park is a must. If you wander in at the lower east corner (what is that 5th Av / 59th St?) you can follow the paths up to the Met, just a little but further and you find the reservoir; if you duck out to 5th Av you're not that far from the Cooper-Hewitt. If the timing is just right, there will be just a little bit of snow on the ground but the pathways will be clear and it's an absolutely beautiful sight.

- Just get an unlimited ride MetroCard and ride the subways around. MTA's Arts4Transit program is awesome as far as planned public art goes and you'll see plenty of other interesting things along the way.

- In a similar vein, just walk the streets. One of my favorite things to do anytime work takes me to a city, and NY is no exception, is to just wander around without a map or plans of any kind. I'll see something interesting and stop in for a bit; eventually I'll start to get hungry and just let my nose guide me to something that smells good. I've found plenty of decent, literal holes-in-the wall that you would never hear about from any tourist this way.

- Radio City Music Hall is an interesting tour, but I'm a little biased because the first and only time I've done it was the day before I attended the Tony Awards. /That/ was fun.

- When in doubt ask a cop. Most police officers (NYPD included) are rather friendly. And they also usually know a good place near by to get a drink / eat / not get shot. The most confused I've ever seen a cop was when I asked a NYPD officer if he would mind taking my picture as I left the Tonys. After the "You...want... me..." stunned reaction, he happily snapped a few.

- Check out Lincoln Center. Again a little biased (or perhaps pseudo-narcissistic)

- I would probably not do the Empire State Building again. Nothing but tourists, and in a city with so much else to offer kind of an overpriced waste of time, IMHO.

NY really is my favorite city, I just wish we had more commercial projects out that way so I had more of an excuse to visit. And now I'm /really/ hoping I can make it to Masters.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer


-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Aaron
Sent: Monday, September 17, 2012 4:48 PM
To: Crestron@...
Subject: [Crestron] OT - Things to do in NYC after Masters

My class is Dec 5-7 and my wife is going to fly in Friday night so we can spend the weekend in NYC. We have never been there and I was wondering if anyone has any 'must-do's' for our first trip to NYC. Please remember it is in December.

Some of the idea's I got are:

Broadway play
Rockefeller Plaza
Central Park
Museum of Modern Art

Any other idea's?



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links


question

PATRICK HOUSTON
 

you build a program for a learning center for one class to start, what is the best(easiest) way to quickly add rooms, another program?.

Patrick Houston
Installation Manager
Telephone Comm,inc
Nicet III
2564530648

[Non-text portions of this message have been removed]


Re: Axis VAPIX module?

Andrew Yalowitz
 

Once I resolve my Axis multicast issue (see thread from earlier today), this was my next area of inquiry. I'd have to say that, looking over the API docs on the Axis website, it looks pretty straightforward for the sort of basic PTZ / preset control that I typically would be most interested in.

A

From: Crestron@... [mailto:Crestron@...] On Behalf Of Sammy Truong
Sent: Monday, September 17, 2012 5:47 PM
To: Crestron@...
Subject: [Crestron] Axis VAPIX module?



Hey all,

I've got a project in the queue with many Axis PTZ cameras on the job sheet (model is P5512 specifically). Does anybody have an Axis VAPIX module to control PTZ and possibly some other functions? Didn't see any Axis stuff in the Files section. There was a thread started by eldiablo80 earlier this year working through gaining control -- are you here eldiablo80? Did you ever make a module?

Thanks in advance,
Sammy


Re: Elapsed Seconds - Core 3 TP

m76jc
 

Thanks. That's exactly what this is for .

--- In Crestron@..., Neil Dorin <neildorin@...> wrote:

Send your seconds as an analog join directly to any text field and use
<cipa>X?%t</cipa> (where X = analog join number) in the text to display an
incrementing timer. Just did this for elapsed recording time on a Capture
HD a couple weeks ago. Works great.

On Mon, Sep 17, 2012 at 4:11 PM, m76jc <m.clark@...> wrote:

**


Anyone have any ideas on what would be the best way to get elapsed seconds
on a core 3 TP. I am hoping to do this without simpl+ (which i can do
easily). I could do a equate to an SIO but that would run out after 9999
seconds. Thanks for any ideas.





Re: User Module vs. Simpl Symbols - File Size, Compile Time, and Resources

 

Hi Jason,

As Heath says, it's hard to comment on why compile times/program size are what they are in your case, though I think he was drawing attention to the fact that your system design apparently grows exponentially as either increases - which can't be good.

In terms of Modules vs. "straight" Symbols I'll do my best to shed some light on things (assuming I've understood the situation correctly...):

Simpl Windows user modules are purely a convenience. They provide encapsulation of reusable logic which allows for reuse, easier/safer modification of multiple instances, code readability (one would hope!) and smaller main program size.

For each instance of your logic in your program, if you include a reference to the user module, your program file contains a single reference to the user module logic, as opposed to all of the symbols that are contained within. That would account for the huge variantion in size of your SMW file.

When you compile, simple windows reads the user module and *effectively* in-lines your module in the compilation - a new set of symbols for each and every reference. The resulting compiled program is exactyly the same - no difference in symbols/signals/processor resources. It's not like a traditional library module that has a shared code segment.

Unfortunately, I have a suspicion that Simpl Windows reads the user module each and every time it is included, which will also account for the significantly longer compile times when using masses of modules. [Possibly a contributor as to why SB takes so long to compile?]

The basic "primitive" symbols are all read into Simpl Windows at startup (part of the long program startup time!) so a program comprised of native symbols will not share that file IO overhead.

Having said that, the benefits of using modules will normally far outweigh any compile time overhead, so they're definitely a *good* thing.

If you're finding the program unmanageable or compile times are longer than you'd like, I would be tempted to look at why your design requires "Rooms * User_Interfaces" modules. Heath's suggestion of using Crosspoints should provide a much more linear growth.

Hope that helps,
Ol


Re: ADMS-G2 - Auto Lookup Feature

 

My coworker looking over my shoulder told me this - all the media is automatically looked up when you add the NAS drives as a Library under the Advanced Configuration. Movies added later are discovered on a daily basis or can be discovered instantly by selecting Check for New Media under Advanced.

--- In Crestron@..., "asmlw29" <asmlw29@...> wrote:

Hello!

Just hooked one of these up and pointed to 4800 movies located on NAS units in the house. Works great! However, anyone know how to do an auto-lookup of all films to get metadata? Instructions tell me how to do one at a time, but that will take forever! Did Crestron forget this?

Thanks!


Re: Elapsed Seconds - Core 3 TP

Anthony Desimone
 

Woops sorry. Just too eager to answer I guess... haha


Re: Elapsed Seconds - Core 3 TP

Anthony Desimone
 

Analog Increment that adds 1d every second.

--- In Crestron@..., "m76jc" <m.clark@...> wrote:

Anyone have any ideas on what would be the best way to get elapsed seconds on a core 3 TP. I am hoping to do this without simpl+ (which i can do easily). I could do a equate to an SIO but that would run out after 9999 seconds. Thanks for any ideas.


Re: Elapsed Seconds - Core 3 TP

 

Send your seconds as an analog join directly to any text field and use
<cipa>X?%t</cipa> (where X = analog join number) in the text to display an
incrementing timer. Just did this for elapsed recording time on a Capture
HD a couple weeks ago. Works great.

On Mon, Sep 17, 2012 at 4:11 PM, m76jc <m.clark@...> wrote:

**


Anyone have any ideas on what would be the best way to get elapsed seconds
on a core 3 TP. I am hoping to do this without simpl+ (which i can do
easily). I could do a equate to an SIO but that would run out after 9999
seconds. Thanks for any ideas.



Elapsed Seconds - Core 3 TP

m76jc
 

Anyone have any ideas on what would be the best way to get elapsed seconds on a core 3 TP. I am hoping to do this without simpl+ (which i can do easily). I could do a equate to an SIO but that would run out after 9999 seconds. Thanks for any ideas.


Axis VAPIX module?

Sammy Truong
 

Hey all,

I've got a project in the queue with many Axis PTZ cameras on the job sheet (model is P5512 specifically). Does anybody have an Axis VAPIX module to control PTZ and possibly some other functions? Didn't see any Axis stuff in the Files section. There was a thread started by eldiablo80 earlier this year working through gaining control -- are you here eldiablo80? Did you ever make a module?

Thanks in advance,
Sammy


Re: OT - Things to do in NYC after Masters

 

(warning: Excessively long post follows)

My first "real" trip to NYC was my 3rd Masters and in the middle of January. I spent a lot of time (the better part of 4 days) walking around outside in ~18degree (F) temps and until I found darted into a dug store to grab a (ugly but useful) knit head thing my ears would go numb after about 45 minutes, but otherwise it wasn't too bad.

I've used my HHonors (Hilton) points cache to stay at a few properties on Manhattan. I'd pass on the Waldorf (not impressed by the location or service -- seemed to be riding on reputation) but the Hilton Times Square is possibly my favorite hotel in the US.

Decent sized, clean and modern rooms with good service and a great location (it's almost literally right on top of the Times Square/42nd Street MTA station and from there you can get anywhere pretty easily).

- I love MoMA and not the biggest fan of the Met but you should go at least once. The Cooper-Hewitt National Design Museum is also one of my favorites, though I don't know if they've finished their renovation project. The Guggenheim is also a NY landmark, but the exhibitions can be kind of out there. Definitely consider what's on display before deciding to lay down cash [if you have Museum Staff ID, though, make sure you show it at any of these]

- For Broadway, if you aren't wed to a particular check out the TKTS booth for discount tickets day of show. One of my favorite things to do is just go down there, and pick a show I've never heard of, or heard very little about and get a ticket. The tickets are usually pretty decent. But I've also been burned (Boeing Boeing and Next to Normal - Awesome; Fela - So far beyond awful I managed to get a partial refund.)

- Central park is a must. If you wander in at the lower east corner (what is that 5th Av / 59th St?) you can follow the paths up to the Met, just a little but further and you find the reservoir; if you duck out to 5th Av you're not that far from the Cooper-Hewitt. If the timing is just right, there will be just a little bit of snow on the ground but the pathways will be clear and it's an absolutely beautiful sight.

- Just get an unlimited ride MetroCard and ride the subways around. MTA's Arts4Transit program is awesome as far as planned public art goes and you'll see plenty of other interesting things along the way.

- In a similar vein, just walk the streets. One of my favorite things to do anytime work takes me to a city, and NY is no exception, is to just wander around without a map or plans of any kind. I'll see something interesting and stop in for a bit; eventually I'll start to get hungry and just let my nose guide me to something that smells good. I've found plenty of decent, literal holes-in-the wall that you would never hear about from any tourist this way.

- Radio City Music Hall is an interesting tour, but I'm a little biased because the first and only time I've done it was the day before I attended the Tony Awards. /That/ was fun.

- When in doubt ask a cop. Most police officers (NYPD included) are rather friendly. And they also usually know a good place near by to get a drink / eat / not get shot. The most confused I've ever seen a cop was when I asked a NYPD officer if he would mind taking my picture as I left the Tonys. After the "You...want... me..." stunned reaction, he happily snapped a few.

- Check out Lincoln Center. Again a little biased (or perhaps pseudo-narcissistic)

- I would probably not do the Empire State Building again. Nothing but tourists, and in a city with so much else to offer kind of an overpriced waste of time, IMHO.

NY really is my favorite city, I just wish we had more commercial projects out that way so I had more of an excuse to visit. And now I'm /really/ hoping I can make it to Masters.

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Aaron
Sent: Monday, September 17, 2012 4:48 PM
To: Crestron@...
Subject: [Crestron] OT - Things to do in NYC after Masters

My class is Dec 5-7 and my wife is going to fly in Friday night so we can spend the weekend in NYC. We have never been there and I was wondering if anyone has any 'must-do's' for our first trip to NYC. Please remember it is in December.

Some of the idea's I got are:

Broadway play
Rockefeller Plaza
Central Park
Museum of Modern Art

Any other idea's?



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links


Re: OT - Things to do in NYC after Masters

 

I grew up in NY but don't live there any more. However, here are some things to think about.

In NYC you really have 2 Art museums

1) the metropolitan museum of art
2) the Guggenheim museum - modern art with the building designed by Frank Lloyd Wright

Both are excellent. Check what is showing at each and that can help you make a decision.

I would also add to your list

September 11th memorial
Window shopping on 5th ave. Store displays can be pretty amazing in December even if you can't afford to buy anything :-)
Depending on what is showing - Lincoln Center for the performing arts

Of course asking what to fit in for a weekend is an impossible task given how much there is to see in NYC

If you don't want to spend a fortunate on dinner you can just go to Chinatown and find the restaurant with the longest line. If the locals are willing to wait in line you know the food will be really good.

Hope this helps

Jay

----- Original Message -----

From: "Aaron" <aaron.larson@...>
To: Crestron@...
Sent: Monday, September 17, 2012 2:48:09 PM
Subject: [Crestron] OT - Things to do in NYC after Masters





My class is Dec 5-7 and my wife is going to fly in Friday night so we can spend the weekend in NYC. We have never been there and I was wondering if anyone has any 'must-do's' for our first trip to NYC. Please remember it is in December.

Some of the idea's I got are:

Broadway play
Rockefeller Plaza
Central Park
Museum of Modern Art

Any other idea's?


Re: TPMC-4SMFD hard button feedback

 

Lol, clearly I didn't know about the device extender either.

My apologies for the initial misinformation.

-Neil

On Mon, Sep 17, 2012 at 3:03 PM, Ihaia Greensill <ihaia@...>wrote:

Thanks guys thats some really helpful info J. I never knew about the
device extender option so for me its a great discovery.

Additionally its good to hear about your experiences with the TPCS-4
series. I shall keep all of this in mind while going to try it out.



Cheers,



Ihaia





*From:* Crestron@... [mailto:Crestron@...] *On
Behalf Of *Chip
*Sent:* Tuesday, 18 September 2012 3:41 a.m.
*To:* Crestron@...
*Subject:* [Crestron] Re: TPMC-4SMFD hard button feedback






I can concur 1000% with Lincoln with regards to the TPCS-4. Same "lags
sometimes" when doing the most simplistic attempts at lighting buttons.
(Whoda thunk that???)

Likewise, yes - you can access the "multi state" buttons individually
through analogs on said device extender...

- Chip

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

The TPMC-4SM (and TPCS-4SM, not sure about the "D" version, though) do
via the System3 Reserved Joins device extender with an analog value for
each button (0 - off, 1 - green, 2 - red, IIRC)

Beware, though, I'm not sure why but changing the backlight color seems
to be a particularly intensive task, especially on the TPCS. Depending on
what else the touchpanel is doing at the moment it can range from "slight
lag" to "OMG, it's not working! <beat> Oh, wait, there it goes!"

Needless to say, I have not found acceptable results with trying to use
the backlight color as a "Yes, you pressed me!" indication. I have,
however, in a few projects used it to indicate things like audio and video
mute status. But again, be ware of the hardware limitations: I generally
prefer to make mute buttons "blink" (driven by a common 0.5s/0.5s OSC) so
they jump out at the user, this does not work well on the TP**-4SM family.

On the TPMC-4SM doing this tends to get the panel farther and farther
behind so that after a few seconds the panel is so far behind that the
observed blink rate is more like 1.0s/1.0s -- and the worst part is that it
queues them up, so the button will continue to blink well after it's no
longer being told to blink by the program.

So, in other words, don't try changing the color too frequently :)

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of Neil Dorin
Sent: Monday, September 17, 2012 1:32 AM
To: Crestron@...
Subject: Re: [Crestron] TPMC-4SMFD hard button feedback

IIRC the TPMC-4SM does not support individual led feedback for hard
buttons. You can select green or red as the backlight colour and then turn
the whole backlight on/off.

-Neil Dorin

Sent from my iPad

On Sep 16, 2012, at 10:50 PM, "ihaia09" <ihaia@...> wrote:

Hi Guys,

I am having a play with our campuses first TPMC-4SMFD and have gotten
stuck on the feedback for the LED hardbuttons. I have limited experience
with Crestron touch panels as all we have on campus TPSG-TPI's with
different manufacturer touch panels so any help would be gladly
appreciated.

The result I am after is to get the LED hardbuttons to illuminate
individually dependant on feedback. Currently all i'm getting is all hard
buttons illuminated constantly whilst the panel is awake :(.
I presume this can be done as it mentions in a crestron document that
the buttons can operate individually or globally. However I cannot find
where this is configured.

Additionally I have not made this a core-3ui project as I need to keep
a similar look to our existing user interfaces. Does it need to be a
core-3ui project to get the outcome I want?

Thanks in advance for any help you can offer.

Cheers,

Ihaia


[Non-text portions of this message have been removed]



------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links



[Non-text portions of this message have been removed]



------------------------------------




Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links




[Non-text portions of this message have been removed]


Re: TPMC-4SMFD hard button feedback

 

Thanks guys thats some really helpful info J. I never knew about the
device extender option so for me its a great discovery.

Additionally its good to hear about your experiences with the TPCS-4
series. I shall keep all of this in mind while going to try it out.



Cheers,



Ihaia





*From:* Crestron@... [mailto:Crestron@...] *On
Behalf Of *Chip
*Sent:* Tuesday, 18 September 2012 3:41 a.m.
*To:* Crestron@...
*Subject:* [Crestron] Re: TPMC-4SMFD hard button feedback






I can concur 1000% with Lincoln with regards to the TPCS-4. Same "lags
sometimes" when doing the most simplistic attempts at lighting buttons.
(Whoda thunk that???)

Likewise, yes - you can access the "multi state" buttons individually
through analogs on said device extender...

- Chip

--- In Crestron@..., Lincoln King-Cliby <lincoln@...> wrote:

The TPMC-4SM (and TPCS-4SM, not sure about the "D" version, though) do
via the System3 Reserved Joins device extender with an analog value for
each button (0 - off, 1 - green, 2 - red, IIRC)

Beware, though, I'm not sure why but changing the backlight color seems
to be a particularly intensive task, especially on the TPCS. Depending on
what else the touchpanel is doing at the moment it can range from "slight
lag" to "OMG, it's not working! <beat> Oh, wait, there it goes!"

Needless to say, I have not found acceptable results with trying to use
the backlight color as a "Yes, you pressed me!" indication. I have,
however, in a few projects used it to indicate things like audio and video
mute status. But again, be ware of the hardware limitations: I generally
prefer to make mute buttons "blink" (driven by a common 0.5s/0.5s OSC) so
they jump out at the user, this does not work well on the TP**-4SM family.

On the TPMC-4SM doing this tends to get the panel farther and farther
behind so that after a few seconds the panel is so far behind that the
observed blink rate is more like 1.0s/1.0s -- and the worst part is that it
queues them up, so the button will continue to blink well after it's no
longer being told to blink by the program.

So, in other words, don't try changing the color too frequently :)

--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
V: 440.449.1100 x1107 | F: 440.449.1106 | I:
Crestron Authorized Independent Programmer

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of Neil Dorin
Sent: Monday, September 17, 2012 1:32 AM
To: Crestron@...
Subject: Re: [Crestron] TPMC-4SMFD hard button feedback

IIRC the TPMC-4SM does not support individual led feedback for hard
buttons. You can select green or red as the backlight colour and then turn
the whole backlight on/off.

-Neil Dorin

Sent from my iPad

On Sep 16, 2012, at 10:50 PM, "ihaia09" <ihaia@...> wrote:

Hi Guys,

I am having a play with our campuses first TPMC-4SMFD and have gotten
stuck on the feedback for the LED hardbuttons. I have limited experience
with Crestron touch panels as all we have on campus TPSG-TPI's with
different manufacturer touch panels so any help would be gladly appreciated.

The result I am after is to get the LED hardbuttons to illuminate
individually dependant on feedback. Currently all i'm getting is all hard
buttons illuminated constantly whilst the panel is awake :(.
I presume this can be done as it mentions in a crestron document that
the buttons can operate individually or globally. However I cannot find
where this is configured.

Additionally I have not made this a core-3ui project as I need to keep
a similar look to our existing user interfaces. Does it need to be a
core-3ui project to get the outcome I want?

Thanks in advance for any help you can offer.

Cheers,

Ihaia






------------------------------------



Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links



[Non-text portions of this message have been removed]


Re: OT - Things to do in NYC after Masters

Heather Baiman
 

Weather permitting, I wouldn't miss walking the Brooklyn Bridge, then
get dim sum in China Town.

Take the free ferry to Staten Island (and come right back) which will
give you nice views of lower Manhattan, Ellis Island and the Statue of
Liberty.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of Heather Baiman
Sent: Monday, September 17, 2012 4:55 PM
To: Crestron@...
Subject: RE: [Crestron] OT - Things to do in NYC after Masters

Since you are an AV guy - you should make a pass through Grand Central
Station. It's nice to see the big main hall with its celestial ceiling,
but go downstairs outside the Oyster Bar. There is an open square
vaulted space. You stand facing one vault and your spouse stands facing
the vault diagonally opposite. Now talk into them; you can hear each
other across the room. There is an acoustical 'thing' created by the
Guastavino tiled vaults.

-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On
Behalf Of Aaron
Sent: Monday, September 17, 2012 4:48 PM
To: Crestron@...
Subject: [Crestron] OT - Things to do in NYC after Masters

My class is Dec 5-7 and my wife is going to fly in Friday night so we
can spend the weekend in NYC. We have never been there and I was
wondering if anyone has any 'must-do's' for our first trip to NYC.
Please remember it is in December.

Some of the idea's I got are:

Broadway play
Rockefeller Plaza
Central Park
Museum of Modern Art

Any other idea's?



------------------------------------

**
***

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
**
***Yahoo! Groups Links





------------------------------------

**
***

Check out the Files area for useful modules, documents, and drivers.

A contact list of Crestron dealers and programmers can be found in the
Database area.
**
***Yahoo! Groups Links


Re: OT - Things to do in NYC after Masters

 

I do this either on my own (or with my GF last year) every year at Masters.

1. Guggenheim (MOMA is great, but if you have to pick one, go for the
Guggenheim)
2. Museum of Natural History/Hayden Planetarium
3. If you like stand-up comedy, shows are cheap and plentiful. It's not
hard to catch a big name on any given weekend.
4. Go check out Ground Zero/Freedom Tower site. It's worth it just to see
the construction of the new towers
5. Empire state/Chrysler building are a bit cliche but worth it if you've
never been before.
6. Ellis/Liberty Island tour.
7. Grand Central Station
8. Madison Square Gardens/Yankee Stadium if you're into sports
9. Wall Street
10. 5th Ave if you plan on letting your wife shop and want to come home
broke....
11. Skating in Central Park South (5th Ave & W 59th SE corner)
12. Central Park Zoo
13. Eat Italian food in little Italy...... (This should be #1 IMHO)
15. Eat a central park hotdog/pretzel/roasted nuts/anything

Just to name a few touristy ones...

-Neil


On Mon, Sep 17, 2012 at 2:48 PM, Aaron <aaron.larson@...> wrote:

**


My class is Dec 5-7 and my wife is going to fly in Friday night so we can
spend the weekend in NYC. We have never been there and I was wondering if
anyone has any 'must-do's' for our first trip to NYC. Please remember it is
in December.

Some of the idea's I got are:

Broadway play
Rockefeller Plaza
Central Park
Museum of Modern Art

Any other idea's?



[Non-text portions of this message have been removed]