开云体育

As I understand it, that capability is now built into the latest "core" SSI module.? I don't believe a seperate updater/helper module is needed.

Thanks. We have done that once during this project, and may end up doing so again. We now have Crestron ATSG's full attention, and will be updating switch firmware today. I will update the group

Global cache has their control tower website that will send you entire libraries with both hex and global cache codes included.

Hi to all tell me how to change the sound source on Denon AVR-X2700H from CD to another in quick actions for the receiver. Or another way to change input. I got Sonons and TV connected to it, but in

Can you describe the conversion procedure with C5?

You can also use C5 Debugger to convert most crestron IR files to global cache. Only files that contain multicodes don't work with C5 atm Nathan Durfee Owner of JayLia Programming, Llc. Mobile:

Thanks, figured it out. The module for the IR is worthless.

Use the Global Cache iConvert utility to convert hex IR codes to their sendir format. You can get that from https://www.globalcache.com/files/software/iConvert.zip

I've seen some threads on using an SIO to send IR commands through a GC but not certain what format to send. I have hex values for the IR. Is there a conversion that needs to happen or a header that

We have several of these LG displays that are being controlled via RS232 and "Power On" and "Power Off" are working but not Power Polling. When sending the command "ka 01 ff\r" I don't get a response

Hey Aaron, Search the website for the "Crestron Fusion? Software SSI Module Programming for SW-FUSION" reference guide. That's what I referenced when refreshing our Fusion integration several years

Is it possible to have a license for this product and use it on multiple machines? I am rarely using my computer for debugging, I am normally logged into someone else's computer for debugging and I

If the other suggestions did not work I would suggest what I like to call, "Get all the liars in the same room" or at least the same call. Schedule a call with Crestron, the person responsible for

Hello! I'm working on a new code refresh for our DMPS3s that we have on our campus, and would like to use one code for all them. If I'm reading correctly, it looks like I should probably use the GUID

Hi Guys, I try to code a Volume up and down by Press and hold button. I can see the slider on UI is moving up and down when i press and hold the button, but the level signal sends out only when the

That's a good point!! I would definitely run a second slot program. You can have the Console in Slot#2 send PROGRESET -P1 to reset slot #1...

The $5 rotary timer is an effective restart mechanism. But it would really be better to figure out why it needs restarting.Sent from my Verizon, Samsung Galaxy smartphone

If your program actually dies then a program based restart won't work unless you run that in a different program slot and assuming that doesn't die as well... Or from a secondary proc and tcp to the

Hi, Thanks, i missed that you need to have 5 digits, when i added leading zeroes to my number it worked. Lars

Besides checking to see if your IP was blocked as Oliver mentioned (you can also LISTBLOCKEDIP from console)… Can you SSH to it (e.g. via PuTTY?) Then, in no particular order: Have you tried an