Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Crestron
- Messages
Search
|
Re: Slider Crosspoint Issue
I just fixed this issue today. Here is what I did.
toggle quoted message
Show quoted text
Analog equate driven off econnect room id that triggers an abuf for each room that sets tp's analog fb to vol out of that room. I have 3 sets of xpoints TP -> Room -> Device Hope that helps Nick Sent from my eMail. On May 1, 2013, at 7:17 PM, Jason Andersen <jandersen@...> wrote:
I attempted this several times and I still can't come up with a viable solution. I am going to do my best to explain this and if anyone wants to help it would be appreciated. I want to use a slider for volume and I use crosspoints for the interfaces and room modules, like I'm suppose too. When I use the slider on interface A it sends the volume to the room A module correctly but that slider value is held in memory. When I change to room B, interface A still holds the slider value and changes the volume of Room B to whatever the slider was left at. My brain hurts. [Non-text portions of this message have been removed] |
|
Slider Crosspoint Issue
Jason Andersen
I attempted this several times and I still can't come up with a viable solution. I am going to do my best to explain this and if anyone wants to help it would be appreciated.
I want to use a slider for volume and I use crosspoints for the interfaces and room modules, like I'm suppose too. When I use the slider on interface A it sends the volume to the room A module correctly but that slider value is held in memory. When I change to room B, interface A still holds the slider value and changes the volume of Room B to whatever the slider was left at. My brain hurts. |
|
On screen Project Upload error message
Hi
After eventually seeing green ticks next to all my equipment Including idoc :) i decided to try and upload And then...... An error occurred while synchronising Details... Type mismatch What does this mean? Touch screen project uploaded if I un ticked the verified box of aads file? I then get a message saying unable to save due to type mismatch followed by run time error. So close yet so far can anyone help? Thanks |
|
Re: Grace Internet Tuner
I'm not sure why everyone is having such trouble with Grace. When I asked, I got a message with attachments including the IR protocol and IP control info. Sure - it's UPnP, but they shared it freely. There was no withholding of documentation.
toggle quoted message
Show quoted text
I'm happy to share the message and documentation with anyone who contacts me off-list. - Dave --- In Crestron@..., Seth Olle <seth@...> wrote:
|
|
Re: Polycom HDX 8000 (2 x Camera Control)
Got ya, thanks!
toggle quoted message
Show quoted text
--- In Crestron@..., Seth Olle <seth@...> wrote:
|
|
Re: Polycom HDX 8000 (2 x Camera Control)
Seth Olle
Near camera will be selected whenever you are on camera 1 or 2,
toggle quoted message
Show quoted text
Video inputs down below what input you select drives the traffic of control. Put signals on it, watch it in debugger. From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>> Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Date: Wednesday, May 1, 2013 4:39 PM To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Subject: [Crestron] Re: Polycom HDX 8000 (2 x Camera Control) Do you mean select near end camera to control camera 1, and then select near end camera again, and it toggles to camera 2 control? --- In Crestron@...<mailto:Crestron%40yahoogroups.com>, Seth Olle <seth@...> wrote:
|
|
Re: Revisiting IDOCs and lightning
Heath Volmer
I'm with you there...
toggle quoted message
Show quoted text
On May 1, 2013, at 2:45 PM, "Jesus @ Audio& Net Artist" <audioandnetartist@...> wrote:
Honestly I hate to code Idocs... |
|
OT: Introducing HDMI to component distribution (PVID/BIPAD) creates ground loop
Basically, the above. We've taken over an old analog distribution system, and recently replaced an old Fujitsu plasma w/ a large Samsung LED unit. No problem while on component distribution.
We were then asked to connect 'His Cable' to the new TV via HDMI as the lead-in to a DM system. Pulled 2x Cat6 about 60' and used a Vanco balun to accomplish this. We now have a ground loop on component signals (additional cable boxes, BD, AppleTV gen1) to the Samsung. No issue on the other TVs. Disconnecting the HDMI from the cable box fixes the issue. Other cable boxes/BD also reintroduce the loop. Have tried an isolator on the component connections between the TV and the PVID, and the PVID and the cable box, no change. Any suggestions/fixes? |
|
Re: Revisiting IDOCs and lightning
Jesus @ Audio& Net Artist
Honestly I hate to code Idocs...
On Wed, May 1, 2013 at 4:23 PM, Seth Olle <seth@...> wrote: ** -- *Jesus Tossas* * * *Technology Architect, Audio Engineer, Programmer* * * *787-329-3944* * * Contact Info <> [Non-text portions of this message have been removed] |
|
Re: Polycom HDX 8000 (2 x Camera Control)
Do you mean select near end camera to control camera 1, and then select near end camera again, and it toggles to camera 2 control?
toggle quoted message
Show quoted text
--- In Crestron@..., Seth Olle <seth@...> wrote:
|
|
Re: Polycom HDX 8000 (2 x Camera Control)
Seth Olle
Yep when you select the camera on the module it directs the command to the second camera.
Done it bunch of times From: avsystemdesign <avsystemdesign@...<mailto:avsystemdesign@...>> Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Date: Wednesday, May 1, 2013 4:29 PM To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Subject: [Crestron] Polycom HDX 8000 (2 x Camera Control) I am looking at the Polycom HDX 9000 v3.3.3 Crestron module, and not exactly sure how a person would control two Polycom Eagle Eye cameras connected up to the Codec?! Two local cameras that is. Has anyone done this before, am I missing something really simple here? Any help would be much appreciated. |
|
Polycom HDX 8000 (2 x Camera Control)
I am looking at the Polycom HDX 9000 v3.3.3 Crestron module, and not exactly sure how a person would control two Polycom Eagle Eye cameras connected up to the Codec?! Two local cameras that is.
Has anyone done this before, am I missing something really simple here? Any help would be much appreciated. |
|
Re: Revisiting IDOCs and lightning
Seth Olle
That will only work for table dock, don't think will work for in wall.
toggle quoted message
Show quoted text
But yes for one siting on the desk will work. Crestron needs to come out with these quickly for lightning. But for that matter Airplay works just as good, and who really has IPODS anymore? I got rid of mine when got first iPhone, and once airplay came out never physically connected it again to anything. On 5/1/13 4:13 PM, "Heath Volmer" <hvolmer@...> wrote:
Seth, you're saying to forgo the puck? |
|
Re: Revisiting IDOCs and lightning
Heath Volmer
Seth, you're saying to forgo the puck?
toggle quoted message
Show quoted text
On May 1, 2013, at 2:09 PM, Seth Olle <seth@...> wrote:
The non wall dock work fine, if you go from the cable that goes into dock, put that into lighting adaptor into iPhone or touch. You good. |
|
Re: Revisiting IDOCs and lightning
Seth Olle
The non wall dock work fine, if you go from the cable that goes into dock, put that into lighting adaptor into iPhone or touch. You good.
toggle quoted message
Show quoted text
From: Bart Podkowka <bart@...<mailto:bart@...>> Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Date: Wednesday, May 1, 2013 3:52 PM To: "<Crestron@...<mailto:Crestron@...>>" <Crestron@...<mailto:Crestron@...>> Subject: Re: [Crestron] Revisiting IDOCs and lightning Forget about wall dock and adapter. The iThingy won't fit Saludos, Regards, Mit freundlichen Gr眉脽en, Bart J. Podkowka CISoftware Mallorca Tel. +34 616273563 www.cisoftware.eu<> On 1 May 2013, at 21:39, "Heath Volmer" <hvolmer@...<mailto:hvolmer%40ddsys.co><mailto:hvolmer@...<mailto:hvolmer%40ddsys.co>>> wrote:
It's been several months since the lightning iThingies have come out. I know there are various adapters available. Does anyone have any good/bad experience to share regarding IDOCs (wall mount) and adapters? I have several in the queue and need to decide how to proceed. My limited experience: I stuck a client's iPhone 5 on the small non-cable lightning adapter, and managed to make it "fit" in the IDOC, but it was bent and sticking out. Not a great "look" not to mention the stress that may have been put on the various connections. Thanks, Heath [Non-text portions of this message have been removed] |
|
Re: Revisiting IDOCs and lightning
Seth Olle
Yes Airplay is fantastic, just stuff system with bunches of Apple Tvs, name them individually for family etc.
toggle quoted message
Show quoted text
No Control just message go to Airplay enabled device you good. MC3 pandora, airplay no, raspberry PI probably. From: weddellkw <weddellkw@...<mailto:weddellkw@...>> Reply-To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Date: Wednesday, May 1, 2013 3:58 PM To: "Crestron@...<mailto:Crestron@...>" <Crestron@...<mailto:Crestron@...>> Subject: [Crestron] Re: Revisiting IDOCs and lightning Not to hijack the thread, but is anyone using AirPlay extensively? I have a few customers who use it via AppleTV, and chose to forego dedicated docks, but sometimes AirPlay devices don't show up as available, necessitating a WiFi on/off cycle (on the iPhone/etc)...or a phone call to me. Crestron at one time mentioned (in-wall) docks for the iPad mini, but I haven't seen anything regarding Lightning or new form-factor's in a while. *Crazy wish list Idea* With Simpl# / SimplPro coming online in the future, is there any possibility of utilizing the stereo-outs on the MC3 for things like a Pandora client, AirPlay client, etc? --- In Crestron@...<mailto:Crestron%40yahoogroups.com>, Heath Volmer <hvolmer@...> wrote:
|
|
Re: Revisiting IDOCs and lightning
Not to hijack the thread, but is anyone using AirPlay extensively? I have a few customers who use it via AppleTV, and chose to forego dedicated docks, but sometimes AirPlay devices don't show up as available, necessitating a WiFi on/off cycle (on the iPhone/etc)...or a phone call to me.
toggle quoted message
Show quoted text
Crestron at one time mentioned (in-wall) docks for the iPad mini, but I haven't seen anything regarding Lightning or new form-factor's in a while. *Crazy wish list Idea* With Simpl# / SimplPro coming online in the future, is there any possibility of utilizing the stereo-outs on the MC3 for things like a Pandora client, AirPlay client, etc? --- In Crestron@..., Heath Volmer <hvolmer@...> wrote:
|
|
Re: Revisiting IDOCs and lightning
Bart Podkowka
Forget about wall dock and adapter. The iThingy won't fit
toggle quoted message
Show quoted text
Saludos, Regards, Mit freundlichen Gr眉脽en, Bart J. Podkowka CISoftware Mallorca Tel. +34 616273563 www.cisoftware.eu<> On 1 May 2013, at 21:39, "Heath Volmer" <hvolmer@...<mailto:hvolmer@...>> wrote:
It's been several months since the lightning iThingies have come out. I know there are various adapters available. Does anyone have any good/bad experience to share regarding IDOCs (wall mount) and adapters? I have several in the queue and need to decide how to proceed. My limited experience: I stuck a client's iPhone 5 on the small non-cable lightning adapter, and managed to make it "fit" in the IDOC, but it was bent and sticking out. Not a great "look" not to mention the stress that may have been put on the various connections. Thanks, Heath |
|
Re: Daikin on an MC3
Bart Podkowka
Try coolcontrol unit. It works better than direct comms.
toggle quoted message
Show quoted text
Saludos, Regards, Mit freundlichen Gren, Bart J. Podkowka CISoftware Mallorca Tel. +34 616273563 www.cisoftware.eu<> On 1 May 2013, at 00:07, "jugglinjim" <sjdennison@...<mailto:sjdennison@...>> wrote:
Has anyone used the Daikin modules on the crestron site on a 3 series processor. I'm having trouble getting the direct socket to connect. I put in a TCP/IP client with the same parameters (IP/port) and it connects fine. There's a note in the text file to force the Daikin IC to use 10baseT connection but I don't have access to change that right now. [Non-text portions of this message have been removed] |
to navigate to use esc to dismiss