开云体育

Hi, Anyone has ayn idea how to add crestron app interface into D3Pro ? thanks

DOH, thanks I assumed I was, but I was wrong going through the browser from another machine showed CERT failure. I guess since I had it working for Gmail, it was working for docs.... Thanks for the

Two options: The fjirst option is exactly as Steve mentioned. I'll just extend that to say that if you want to use Play and Pause symbols then instead of inserting Playing or Paused you can insert -

You'll need Host: docs.google.com. I don't know whether it will work through an stunnel or not -- have you tried hitting the stunnel from your web browser? Crestron@...> wrote:

That's an interesting idea :) -s

Ideally I like to keep that sort of logic on the equipment side of the crosspoint. I think I may as well bite the bullet and run the analogs through the crosspoints and have done with it. SG really

You want to use "Digital Dynamic Text". It would look like this: http://s8.postimg.org/p0p17sjmd/9_2_2014_10_55_24_AM.png http://s8.postimg.org/p0p17sjmd/9_2_2014_10_55_24_AM.png

Hey Guys I am trying to format a URL correctly in simpl+ module. I'm getting 400 bad request error. Can you take a look and see if my syntax is off ?

You can keep your existing SIMPL logic and just add and NOT an INIT to your existing fb signal to drive the mode, no? Crestron@...> wrote:

Cheers Neil, I was trying to avoid that if possible as I am trying to leverage SG into my existing non-SG programming backend. If push comes to shove then I will go that route. Just means I have to

Maybe use an image object with modes. Have mode 0 use a transparent graphic or inactive graphic and mode 1 use your fb/active image

That was a fail!

May have just found it. Use an advanced button - press join = 0, Enable join = fb -slip

How does one implement a legend type arrangement in smart graphics? I need to place 2 legends over a button. Legends have a join of 161 & 162 and are feedback only. These sit over a button with a join

My Comcast modem which is suppose to be bridge has an IP address of 10.0.0.1 and its giving my Linksys router(static IP:192.168.1.1) an IP address 10.0.0.2, I got the modem on DMZ which in this case

Good Morning All, Hope everyone enjoyed the holiday. If anyone is in need of a good resi programmer in the NY tri-state area or knows of anyone looking please pm me ted_brincka(at)yahoo. Thanks Have a

you can get the dealer/programmer if you connect to the processor. If they don't left those field empty. {Paf} Mobile Crestron@...> a écrit :

If you must use NAT/Redirection: * In your modem - forward any external Public port of your choosing (eg. 8080) to port 80 (Private port) & the IP address of your processor. * Forward the Crestron app

Hi juan.carbuccia I think if you change your HTTP port of your control system to 81, your problems will be solved. For do this, Go to Toolbox and select your control system (processor) and then select

Hi all. I have 2 problem in Crestron Mobile application. 1- I used video object to show my camera video in my page.But when i want to see that, there is nothing to show. I checked camera URL many