开云体育

Thanks Brian.? I had an idea that would be the case.? although I can route video from a device in another room using the same XIO Director.? tha's why I thought I would ask.

Of note, the driver for the AZ series that is used in Crestron Home seems to work well. Sure would be nice if Sony would put the "Turn On" button back on the webUI.

Is everything in the "chain" updated to 7.x.x.x series firmware. You won't get video unless all of your devices (TX and RX) are running the same level of firmware.

I just updated two NVX cards in one of our Auditoriums, and now either we don't get any video or they go Green first and then go black after about 1 or 2 minutes.

Thanks Josh!

Sorry about that @mrgolden - it's fixed now and I pushed a new file. It now includes the S+. There is a S# dependency, but it calls v1.8 which is already in the SIMPL database. -- Josh Winn The

The following items have been added to the Files area of the [email protected] group. * /SSH Interface v1.8.1.zip ( /g/crestron/files/SSH%20Interface%20v1.8.1.zip ) *By:*

After struggling with these I reluctantly went the IP CCD route. And after that learning curve because of poor documentation I have them working on a site that has 4 of them. Seems to work fine now.

Thanks for this update, but the zip seems to be missing the usp and ush files, and the clz (if there is one).

The AZ demo is in the files section: /g/crestron/files/Sony%20AZ-Series%20IP%20Control%20Testing_compiled.zip You'll want to play around with it and customize as needed, but you

Most of our jobs get a Flo Logic system. Using relays and I/O tied to it we get all we need for our systems. Although I typically only use a Crestron relay to open/close the valve, and an I/O for

In shelf protocol v1.2 they added IP control. If they are there little boxes, those are controlled through the Servers IP address using the clients MAC address. If you can find there protocol document

I've been looking into this lately for my own new home build. ?I have a client with the Phyn system that seems to be ok, but can be finicky. ?Much cheaper than the FloLogic, but I'm sure for a

It looks like I'm going to reprogram a restaurant/bar system with 20 sources and 57 TVs all because some of the source satellite boxes have been changed and they need updated IR drivers but the

I've used Watercop motorized valves on my homes for over 20 years.? They make valves for residential and commercial buildings with pipes up to 4" in diameter. That last one I bought was 15 years ago

Hey @Crestron_Programmer_84, Did you ever get around to finishing the module? If so, are you willing to share? Thanks

Hi All, Has anyone found an integratable Water Main Flow valve that you've had good experience with? FloLogic has started to be big in the luxury home market but there's no integration (And it's

I am surprised it lasted this long. I am not actually a D3 hater (although I have cursed it out many times over the years)! I did a lot of work in it for 20 years and despite the quirks and bloated

*Today I open the page of the D3pro software, and I see this tag:* *Effective March 31, 2025, Crestron D3 Pro software will be transitioned into maintenance mode. For more information, refer to

Hey David, we install DSC systems also.? I'm wondering if you have any more information in regards of how you configure BOTH alarm.com and run Crestron Home over IP.? My understanding like some here