开云体育

Search in the files section, there's something there. If that doesn't work I have one I can share with you, think it came from the Yahoo group (yes it's that old...)

Hi all, i'm looking for a module to control ADA Suite 8x8, but I believe the Suite 16 module will work. We were a ADA dealer, but unfortunately they are no longer in business. Any help would b greatly

If you are going to just use the paging/chime function of NAX/Home, I would think all you would need would be a contact closure input to the processor. That could be a simple push-button of your

My stb's have been upgraded probably 4 times since I signed on with Verizon.? I used the original remote to collect the IR codes and everything has worked fine through all the upgrades until the

Agreed. I've also had good luck with control. the files section has this IR Driver that I've been using: /g/crestron/files/IR%20Drivers/Verizon%20P265.ir I have had some issues with

The mic will tell you when the different lobes gate on/off. MXA910 Response: < REP x AUTOMIX_GATE_OUT_EXT_SIG ON > < REP x AUTOMIX_GATE_OUT_EXT_SIG OFF > Where x is the corresponding lobe. You will

Yes but the thing is that if you place the simpl+ module inside the Simpl module, the signals will always be defined (from argument definition), right?

Nothing available. Although I will say I naver have issues with any Fios box on IR

I realised that I was running into the issue of console comments not always showing up in debugger in toolbox. ? My methods were printing to a remote console via ssh just fine. it’s so weird how

I have both VMS and IPC 4100's and they do respond to IR but occasionally flakey.? Is there protocol available to control them via IP?

We had an issue with HR-310s draining batteries about 3 years ago before Crestron came up with a firmware update for the HR-310 that corrected the issue.? So I would make sure that you have the

I didn't know they were providing solutions for 2N now, but that's awesome. I've been using their custom plates and gadgets since the 90s, back when they were called HoloSound (not Vision). ?

No, but you can do that in SIMPL+ using IsSignalDefined(). [email protected]> wrote:

I searched this forum and couldn't find any info; forgive me if I missed it. We have used audio levels to trigger camera presets many times. Of course, discreet mics work pretty well for this, ceiling

I am in the process of replacing some older Control 4 systems with Crestron Home using the CP4-R processsor and other goodies as required. One stumbling block is a few of these clients have the

Is there any way inside a SIMPL module to know if any of it's input signals are connected in the root program? For example I have a module with 10 input signals and 10 output feedback signals. I want

JEFFO is the man - Love getting his early morning callbacks ;-) Just ordered two 2N pieces from him....

I have a weird situation where one method in a simpl# module won’t write to the console. for argument sake. Public string test() { CrestronConsole.PrintLine(“Hello World”); Return (“Success");

There is a CCD for controlling certain TCL TVs that is available for download from drivers.crestron.io: https://drivers.crestron.io/rad/driver-search/5678%3Fmodel%3D10671 There is help file embedded

Also FYI, I just confirmed with the infamous JEFFO (Love that guy!)...:)? That the VIO product is no longer available...