开云体育

Crestron Mobile is a 32 bit app, newer phones dropped support for it. Started with the Samsung Galaxy S24 which, as far as I know, was the first device which only runs 64 bit apps. Edit: Only option

Bad news, no you wont be able to install it. the problem is after android 14 it will only take 64 bit apps, and Mobile app doesnt run in it. there is a work around, which include downgadre the android

That sounds better. As I understand it, the project is ran on the processor and served up to the UI (iPad etc). Is there a way to get feedback, like the system is in a call etc? Thanks

The tested and supported connections are 2 panels and 1 Crestron Remote Connection.

The deployment guide is accurate if you follow it. The original publication had some issues but otherwise it captures all the needed requirements.

This runs a CH5 project within the Zoom app. It provides full two-way control just as a normal CH5 project running on a panel would. Yes, you will need to follow the deployment guide and make sure the

"30% helpful" Wow that's very encouraging. I better try to shop-test this before I make myself look like a total incompetent in front of the client.

While commissioning our UC-B70-A-Z systems, I followed that deployment guide exactly, and had nothing but problems. I eventually was told by a very smart Crestron employee that the deployment guide

Following these instructions... Product Manual: Crestron? Control App for Zoom Rooms? Software (

No it won't block your Remote Client.

My phone (Android 15) still runs the Crestron's original Mobile App (although I am running the free Blue App). ? Newer versions of Android may not work because I had a different App that stopped

Okay Mates, wondering if any of you have experienced this, and can help. (However, I'm certain I know the answer, and just don't want to accept the answer). Frankly I didn't even remember the Mobile

Just following up... Has Anyone looked into how we might emulate the Voice on this box?? I believe it's 'Google Voice'... Boy if we could get this feature, that could end the need for Comcast,

Does this then block your connection via the Remote Client since there are already two connections? anyone know the answer?

Has anyone developed this for an iPad? I am curious what your experience was. It appears we need to generate certificates for both iPad and CP4. Does two-way feedback work as well? Thanks

We have used Doorbird + Crestron Home on numerous projects and it works just fine. But it still lacks support for receiving calls directly in the Crestron Home app on iOS/Android. That will change

Yes I should look at that, Josh. I do this with AVRs as their FB typically doesn't keep up fast enough to manage increment/decrement on current level.

I also noticed that the current time on the web interface doesn't automatically update unless you refresh/reload the page

We have used the 3rd party driver to control the relays on 2n from CH numerous times.? It works fine.? There is no app support within Crestron for intercom at this time.? The 2n app is the way to

I can’t/won’t comment on the various /other/ ways to integrate with 2N from Crestron Home but we have a native HTTP client for Crestron Home that lets you fire off the commands to 2N to achieve a