开云体育

*Last two times I touched ViewSonic control via IP I was unable to control them, switched to RS232 and was able to control via commands from the manual.*

Has anyone had any luck controlling this display over IP?? If so, any chance you would have a module?? All we are looking to do is power on, power off and volume controls. I called Viewsonic and we

I have not completed the formal ZUM training. I am a CSP and have had a client reach out for (what sounds like) basic support in replacing some keypads which have broke. I am going to parse through

Thorsten, We've done a revision to our driver's documentation and we believe we support the functionality you were referring to with regards to selecting different display modes. Here's a link if

Hi all, I'm would wondering if any could advise how Crestron able to integrate with Schuco door and windows. I found Schuco system need the automation manager with integrate with KNX but couldn't find

CES (Consumer Electronics Show) is a major annual trade show organized by the Consumer Technology Association (CTA) in Las Vegas.? This year there are over 4300 exhibitors and over 130,000 people are

I might go with an option C, which is a bit of the two combined. You have a parsing/sorting module (call it the sorting hat) that looks at incoming data and then sorts it based on subsystems, with

Hi Thorsten, In my drivers I do the parsing in S#.? Then I have individual S+ modules for each device type that is supported by the driver.? So, there might be a thermostat S+ module, a switch S+

I would do option "B". Thats the most common approach you see for other similar hardware.

Hi, I?ve got a bus system called “LCN” installed in my house. It?s similar to KNX, but different. ? The bus is connected to the LAN via gateway and I?m able to send and receive commands to

I'm not certain, but I think it might have something to do with the mode it's armed into. I plan to test it again when the home is unoccupied, and leave it armed for a while before disarming, and also

I have the same issue with one of my clients. It’s random but he reported to me a couple of times but like you, when I test it, it works. Sent: Monday, January 6, 2025 4:18 PM To: [email protected]

I have a system that was installed a couple of years ago, using the Vista 128BPT's onboard serial port and the v1.2 modules from the Application Market.? Everything works fine most of the time, but

Were you able to solve it? I have the same problem

Hi Jay, thanks for pointing out this option. However, I?m looking for a more direct integration. I?ll reach out to Oliver Hall if there Hue-driver will potentially support it. If there?s no direct

Hi @ István Kósik, Do you still happen to have the copy of the program, please? I seem to struggle to find it, unless its has a unique name. Can you re-upload it, please? Regards, Pawel

Hi Lincoln, It's a long time since I installed one of those, and I have never used one to embed audio. However, the operations guide states: NOTE: HDMI audio is heard only if the accompanying video

I'm using/have repurposed a DGE2 in a way it was very much not meant to be used and part of that is using it to embed analog audio (from a Biamp, wired as balanced mono) into the resulting HDMI

Hi Thorsten, I haven't used a Hue Tap Dial.? But, since the device is compatible with Home Assistant, you can leverage an HA green as a gateway for Crestron integration using the technique I outlined

Hi, is it possible to use the Hue Tap Dial within Crestron? Any experience? Thanks, Thorsten