开云体育

Jay have you tried a processor reboot? Any site where Alexa stops working that I have seen a processor reboot fixes it. Seems to be necessary after a long period of time like a year or more.

The light bulb at the bottom to go-to the lights page. Then it just pops up at the top.

Hi Eric, Which light bulb in the Alexa app? When I look at my Crestron devices in the Alexa app they say "device is unresponsive".? If I try turning a light on/off it says "server is unresponsive".

When my system disconnects, if I launch the Alexa app and select the light bulb, if not immediately then after a few moments it will say "Crestron is unlinked, do you want to relink" at the top of

Thanks Gary.? That would be great! There are three key voice commands we're really missing.? I'm going to move those to the hubitat.? The rest can wait until Thursday. Thanks again Jay

I'll be at this project on Thursday, I'll document the process and get it to you.

Thanks.? The only option I'm seeing is to disable the skill and then re-enable it.? I know if I do that all my linked Crestron devices will go away and have to be rediscovered.? This will delete

I don't completely recall, I just dug around until I found a button that re-enabled it. I still don't know what causes it to disable itself, but it has happened several times since then, and the

Thanks Gary!? You are right.? I just played with the skill and now it is telling me that the Crestron Home Automation skill isn't enabled.? What process do you use to re-enable it.? I didn't see

I have a system where the skill in the Alexa app keeps becoming unenabled, re-enabling it fixes it until it happens again.

From an old-timer: … the CN2 series did have limited DTS availability, as in not all time zones were available, however these devices were pre internet so relied totally on the internal clock. The

I've had Alexa voice commands to control my Crestron system set up ever since Crestron released the drivers for it.? Suddenly control of Crestron lights, etc. from the Alexa app, Echo Show devices,

Hello Tray, What was the issue that you found in the Matrox module? Thanks! -- Doug G

Cheers Lincoln, I appreciated the comprehensive answer!! Tim Greenbank Control Systems Engineer

Fantastic, thanks Josh that’s good to know. I had a feeling they did but certain “cheap and cheerful” devices shall we say seem to give the option to set the dates of DST ? Tim Greenbank

Just to follow up, installing a 32GB Sandisk microSD card fix the issues with my client's Roku that was having out of memory issues.

Update. It seems that firmware 14.1.4 does not have this issue.

Hi, Before I open a ticket with Crestron, I want to see if I am missing something. I have discovered that NONE of the -DSP cards, HD, 4K, 4KZ will down mix any LPCM multichannel with 24bit stream. 16

Hi Andrzej, i know this subject was talked about a while ago now but i have a possible job with lots of tridonic msensor g3. Am i right in saying that at first you addressed all the tridonic stuff

I use 2 modules. First I use the CCD VideoServer module for navigation, etc.? Then I use the Roku 3 Series module for direct app selection.? They work fine together and I found the combination to