开云体育

Check message 22975 It was all the rage in 2004! Not sure if Chip has kept that one updated ;-)

Sorry, I initially replied on mobile and was a bit harried… For multicast you need to use the multicast group ID as the address so that the processor/OS knows it needs to send the IGMP Join message

Thanks Lincoln. In this case, would I'd just use the IP of the sending device rather than zeroes for the octets; I'll keep my fingers crossed that this will function. Thanks! Mike

You would not be able to use 0.0.0.0 in this case on a properly configured network as the device needs to send a "join" message to the switch to let it know that it is interested in getting that data.

Have you seen the Masters videos - https://community.crestron.com/s/article/id-2015#MUX-421

There are video on YouTube. Just search Crestron Construct. They are a bit crap though and don't go into enough depth.

Aqara says that the batteries should last 10 months based on locking/unlocking of 10 times per day.? The door I put the lock on to test it is a side door to my garage.? It only gets used about once

That's positive. Keep usbposted on the first battery swap/recharge. Thanks.

After searching here and at true blue's website, I'm not seeing any resources for getting up to speed quickly on Construct. If anyone here knows of a resource or has any pointers I'd appreciate it.

I’ve had the lock installed for a month now. Home assistant, connected to the lock through Matter, reports that the battery is at 97% [email protected]> wrote:

So what's the expected battery life with Matter selected? My guess 2 months max.

Aqara is a leading smart home device manufacturer that was founded back in 2009.? My latest article provides a hands on review of Aqara's latest smart lock, the U300.? Unlike most smart locks, the

Has anyone used the IP2IR as a sensor input? Apparently it broadcasts state changes via udp on port 9132, using a multicast IP of 239.255.250.250. Does the UDP symbol in simpl windows listen on

Pharos is awesome or ultamations device out of the uk Ben Clay ?Ben Clay ?ben@... ?0408 299 796 ?www.autm8.com.au ? ?? ? ? ? ? ? ---- On Wed, 20 Nov 2024 16:38:54 +1100

Cuety Lpu from Visual production

Hi All, Anyone have a LinkPro Z that they'd be willing to sell? Please reach out directly if so, thanks! chris at eicustom dot com

IT Cue Server Mini is always reliable

I?m currently having an Enttec S-Play Nano on my desk i?m planning to use for a homecinema room. You can create cues and playlists directly on the device (via web interface) and just trigger them

Hello, Just wondering what everyone is recommending for dmx integration these days? Thanks in advance

There is also the option from Bluesound. They also have a 'Vault' which caters for storage of music CDs and their products integrate well with Crestron.