开云体育

I am not familiar with that unit but I have seen that behavior before, I got it when the client has an older/cheap Wi-Fi card , and it fails to connect using wpa3. I downgrade to wpa2 and got them

Stefan, Was just reviewing this post.? We are just finishing up our new home build and I am setting up our network which includes numerous VLANs (using pfsense).? I am quite versed in pfsense but

Often the reason for that is simply too weak a signal. You may think you have "full signal using one access point to all 4 corners of my yard", but however strong the AP signal is, it needs to be able

Slightly off topic but I have a strange issue with a Unify UAP-LR access point.? Oh, by the way LR means long range and yes, it rocks. I have full signal using one access point to all 4 corners of my

Has anybody ever managed to make the CSP-LIR-USB work on a M Series Mac in parallels. Ive heard rumours that somebody managed it, but cant get to the bottom of what drivers etc they used!

Not here to defend Bose at all, but the one job I did with their DSP (ESP-880) was pretty flawless. I could hit this thing with 20 commands at once and it did them all immediately, every time.

Does anyone know the command to set the Time Zone on the CEN-GWEXER? There isn't an option in System Info.? I've tried the following in Text Console. TIMEDATE - shows the current time, but doesn't

Thanks for your answer, Even if I don't know from where the 1000 to 1010 come from, I give it a try but always received ~ERROR,2\x0D\x0A. Thanks anyway and congratulation for your first post :-).

I think the MyCrestron is only for Crestron Home and Use the v1.1 Module.

Any experiences with these?? TIA!

Weirdly, this is the second request I e seen for the old SG SDK (unless that was you as well?!) Crestron is the only place this should come from. ?If they won’t give it to you (they will have a

How are you? I am a programmer from Japan. This is my first post. I have controlled Lutron Quantom in the past. I used QSE-CI-NWK-E. I partially controlled with phantom keypad. #device,1000,1,3\n

Search for CRESTRON HOME – GOOGLE NEST THERMOSTAT, the driver is free of charge, send Chris your processor's MAC address to get the full license.

Thanks for your answer, This does work for a physical keypad, but does not for a phantom keypad and unfortunately, I also have to address some phantom one. Thanks anyway, you solve half of my issues.

how much is the driver? Thanks

If the integration ID is 90, and you want to send a press for button 1, the command should be: #DEVICE,90,1,3\x0D\x0A

This was only available on Crestronlabs. If someone still has a copy, this would be a great help Thanks

np

What?? I'm shocked!...

Thank you, Josh! I will give that a go. I appreciate the details on how to do this. Eric