开云体育

We usually do "signal present" indicators...less traffic to the panel. -- Josh Winn The LiquidPixel Group

I have seen something similar in a user module which included a SIMPL+ module that I removed signals from which seemed to create an hidden orphaned signal in SIMPL. I noticed the +/- to expand the

Have you attempted to manually download the firmware to the switches? If you are signed up for EA and enrolled, it should have prompted you to update the switches when it was released. You can try to

Thanks EJ, that would be wonderful... FTR, I have IP control working (I have seen a few glitches). My problem is that I can't get the VoiceReady_F output from the CCD module to go high, and this no

Thanks. I actually got the .bin from the Early release website and also found unifi's - UniFi Switch - Pro AV document which outlines all the other setting that required.? ?It was reasonably

If those amps are NAX amps you will need to double check all the igmp and nvx config settings on the switches. You can find information on Crestron site for that nf Sent: sábado, 28 de septiembre de

Question, I have two USW Pro switches (24/48) neither of them are running EA 7.1 Firmware and neither of them see that as an upgrade.? I checked Unifi's site and they don't advertise that firmware

I have done this about half a dozen times. I had problems with the demo program and just did it my way. IMO the hardest part is trying to advice the tech how to get into the secret menu of the cable

Hi Group, I integrated my first Biamp Tesira and all is working. My question is can you do vu meters in VTPro? With the Crestron DSP you can import a file into VTPro to get a vu meter on the touch

Thanks Chad [email protected]> wrote:

Ive had a corrupt module not update like that before.... I've actually had a Processor Hardware Definition get corrupted like that as well, necessitating a rebuild from the ground up... I want to say

Thanks but I'm ok for now.? The only thing wrong with me is is going to Dunkies and being told how much the bill is with my senior citizen discount.? Just thinking proactive.? My father died at

Thanks.? I actually always do a recompile all (Alt-F12) vs a recompile (F12).? I think the safety of knowing that everything is coordinated is worth the additional compile time wait because I am

F12 (recompile all) may have worked also.

Never mind.? I added a second copy of the umc file to the program, individually copied the signals from the old version to the new version, and then deleted the old version of the module. That fixed

I deleted a signal from the output of a .umc module in one of my SimplWindows programs and replace it with "//" so the module is complete.? The signal is no longer being used so it has been

That's a very difficult situation, I'm sure. It's clear that you love him and are wanting to make provisions for him, which is beautiful!! I think that the router is the key to preparing and managing

Yes, various but not known in advance ISP's.? He would need a router with his own WiFi for his ios tablet Crestron app.? Not to worried about remote management when the time comes to put this into

So no one has done any work on this???

The CTP/SCTP settings are disabled by default, and can't be enabled. That also should not affect SSL connections. It was working before and I'm fairly sure the settings are correct, but I'm waiting