开云体育

To check a marketing feature checkbox. :) [email protected]> wrote:

If you are using contracts in your program then you need to open up your Simpl and resync the contracts- even if you do something simple as change a button label in Construct. Which I think is crazy-

Hi, Anyone still has a copy of Smartgraphics SDK? Or know where to find it? Thanks

Wired, for wireless the Bosch CCS 1000 module will work.

TB still claiming timeout when loading. However, I killed Edge. Restart Edge Reload the UI web XPanel and this time I'm asked to sign in. Didn't have to sign in before. Once signed in - UI is

Grrr, So been working on some simpl code. Made a minor change to the Construct UI - one join number changed. Attempting to re-upload to my CP3 - now getting timeouts. WTF

Figured it out. OK for those of you that will need to do this: In Construct: * Select the hamburger menu On the main project in Solution Explorer * Project Properties * Set the Web XPanel IP ID & Save

I've built a project in Construct as a TST-1080. I don't have a physical panel to test it with. How can I launch the panel like I would do with an SG XPanel? Looking through the online CTI videos on

I have looked through all those MIBs using SnmpB browser and didn't find anything useful, beyond a few basics like model name, program name, software version. I was hoping for CPU, memory, disk,

Try this https://www.dropbox.com/scl/fi/fgs0j4r6spd9gwurkpke1/Crestron_CP3_SD_card-2023-10-31.imgc?rlkey=kjlp2xobkusykgax7b7jafukg&st=cbr8tn7j&dl=0

Hi, Your Dropbox link is broken.? I'm in need of the image file.? Would you please send it too me or repost it. Thanks

Un Effing believable.? I knew I was doing something stupid.? The switchers address is 192.168.1.160.? The pro3's address is 192.168.1.245. All better now.? Thanks for setting me straight.

Yeah, what CrestronFreak said... your table doesn't look correct, it confirms your code and IP table don't match.? Your program is creating a "slot" at IP ID 10 for the 8x2, and your 8x2 is

Like I said, it have bit a while since I did this.? But basically I believe the CSA-PWS10S-HUB-ENET is acting like a Cresnet hub.? So you have to add all the devices to your CP3 main Cresnet on

Thanks, JohnMax!

Mmmm...? At least with a 3-series, I am not able to add a CSA-POWS10S-HUB-ENET to the Cresnet slot, only a CSA-POWS10S-HUB which appears VERY different. No master or local CNET sub-slots...

Almost there! Go back to Simpl, "Project", "Configure System". Move the HD-MD 8x2 (just drag and drop it) to the IP-ID that the HD-MD 8x2 is configured for: 3 Recompile and upload. Double check the IP

I'll cut past the normal responses and give you more information. To get a 2N onto your TSW and One app with HTML and authentication, your best bet is to use CH5-Video but you have to make sure you

So in text console, I typed in IPT.? There's only one entry and it looks correct. CIP_ID 3,? Type Gway,? Status Off line,? Device ID 4 (this I'm not sure of.? What generates that?)? Port 71794,

I might note that 2N will not stream video to 3rd party devices until you set it up.? So you might want to confirm you can stream MJPEG via a web browser on your laptop first.? For rtsp you will