开云体育

Since it seems the position of Crestron is that everything should just work and is therefore poorly documented, I was hoping the group could shed some light on a few things. I have a system with

If you use an itunes account that you purchased the old mobile app, you can still get it from your purchase history.? If you continue with "If it ain't broke, don't fix it" method, you can continue

The RMC-100-C (and non-scaling derivatives) do nothing meaningful to the video stream beyond the HDBT->HDMI conversion so the HDCP2 part doesn’t surprise me since that handshake is between the

I updated some input card and output cards to HDCP2 4K cards on my DM 16x16. To see what would happen, I used a DM-RMC-100 on one of the 4K output cards and I am still getting 4K HDCP2 to the

Yes, I do that too - CCD for basic functions, and one of the modules from the group's Files section for apps. It works fine, "most" of the time, but it does occasionally get stuck - even with a

That is what I do too. I just can’t provide any more details because I’m on the road for the next few days Jay [email protected]> wrote:

I've had very good luck using the CCD file. I use it in combination with one of the modules for app selection.

This reminds me of an issue I thought was fixed, but has reared its ugly head again recently - runaway repeats when using the cursor keys. I've tried several different Roku modules, and at one time

Avycon now makes an onvif VDB? with strike control outputs and many other options but it's POE not 2 wire. We've installed one, I haven't played with it much yet.

Hi, All, I'm an old fart who has been programming Crestron since DOS days. However, I've been retired for 10 years and the new stuff is under my radar. I wrote and maintain the AV systems at my church

Thank you!

I might go with the option of initialising the screens with value of "0" for every source 5-9 for user page video switcher.

The customer just wants four sources on user page, not more than that.

"VC4 is rock solid for us really low service rate. ?We use intel nucs. ?It does make things abit harder. ?We use ChatGPT to work out anything out of our wheelhouse. Michael Restrepo | Owner " I

Dahua intercom do have ONVIF functionality. I checked one to be sure. In fact the video part of the intercom acts like other Dahua camera. You can interface them with NVR, this is what I always do.

Yikes! I understand that we're all trying to just find ways to existing in our current world, as it is... My fundamental issue is that for the most part we are all doing the very same things that we

YES!!!

First thing I would start with is disconnect all other Cresnet devices so its just the Pro2 and the amp. Then using text console, send 'REPORTCRESNET' Does the amp report a cresnet ID? If is does,

From what I have read from many posts about this amplifier is that all i have to do is provide power to the amp and 24 volt power from the crestnet power supply and press the override button to work

VC4 is rock solid for us really low service rate. We use intel nucs. It does make things abit harder. We use ChatGPT to work out anything out of our wheelhouse. Michael Restrepo | Owner Restrepo