开云体育

OK, here's a workaround and I'm down to <2 secs load/refresh time. * downgrade to 1.601.0050 * connect to the server via USB * in console - SSL OFF * AUTH OFF * verify ethernet/port settings and

Hi Jay, thanks for this!. I’ll load it up and comment any value information. Have a great week you all nico Sent: sábado, 3 de agosto de 2024 05:19 p. m. To:

The managed platform page crashing was solved by adding another platform driver (Shelly in my case). After that it started populating correctly and it never crashed again. As for the functionality of

Was just thinking too- did you have emitter covers on them? Ive seen many times without them that the IR will bounce around and get picked up again by the device adding a second IR pulse that was not

Just to add - a bit of searching here does show that this is not a new issue and that running a subst command can help. I've tried this and it does work for me - just seems a bit strange that SW etc

Hi, I've been running SimplWindows/TB etc on a Mac M1 with Parallels running Win 11 for sometime but with infrequent use. I recently wanted to maintain an existing project but had updated to the

@David Chramcow Did you ever solve this, I've got the exact same issue but with a different driver! Thanks

I use Crestron Go on my Android and it's working fine. I also have a couple of clients that use their Android app heavily, and would've reported immediately if something wasn't working right.

Try calling Jon Miller - he has some middleware solutions... 866-937-2833? ext 1303

Talking about the CrestronGO app that supplanted the silver Crestron App I have only been using with iOS for the last few years, but have very few Android clients. All of a sudden can't get Android

Sure would be nice if Crestron invested in Crestron Go. There are several ways they could minimize the 5 sec startup. And 5 secs truly is unacceptable to clients, when expectations are sub-second. If

Sorry for the late reply as I've been abroad. I got in touch with crestron support and it looks like changing the RAVA ringtone is impossible. Also it's not possible to ring once or n times and keep

update. ?I’m able to communicate with the remotes now after buying the new TrippLite USB to DB9. ?I’m currently using 9 ML-600. ?When I go to load any of them they all say low battery and will

If you're not using the original cable supplied by Crestron (they have a gold 1/8 stereo mini plug so they stand out) your tip and ring connectors are probably reversed. Try using a null modem adapter

Nico, Thorsten, Based on Nico's writeup of the problem I have created a new version of the Sensibo Air Module for testing (v1.6).? The issue is this.? When you send a command to the Sensibo API

thats it.? thank you!

Go to https://processorip:49200 and trust the self signed certificate, after that you get a 404 which is expected. Now open your XPanel normally again.

The signals you need are on the top level of the device definitions for NVX when you add them in SIMPL. You'll also need to enable Automatic Initiation on the devices. Here's a screenshot showing an

Can anyone confirm the CH5 Web Xpanel works as generated from Crestron Contrusct?? I have yet to get a successful connection.? The page loads but then the developer console shows errors of Websocket

I find when this happens that the owner breezed through, and didn't allow for the "Local Lan Connection". And it now needs to be allowed through the iPad settings/Crestron_Go App.