开云体育

Thanks Jay! Yes going forward I think this might be a good solution, however: a. Crestron should fix their shit! b. To migrate to your solution would be a major undertaking - i.e adding hardware and a

In my experience, LG's implementation of Crestron Connected has been at best limited. Early implementations were RoomView Connected, required WOL to turn them on and did NOT implement volume control

Yes but thanks anyway.? You pointed me in the right direction.

Woops.? You are correct.? I looked at my garage door beam sensor signals which isn't actually a dry contact.? No PU disable required as you have discovered!

Well almost perfectly. Putting a 1 on all the PU disables held them all high.? Swapped them all out for 0's and now it's working as wished.

I was on the same boat few years ago with LM35. This sensor has too wide temperature range, so an Operational amplifier in series is needed. I made a working prototype that time and it somehow worked.

Just a suggestion, WeatherFlow Tempest smart weather system is a really nice wy of delivering weather conditions and forecast information. You also get local notifications from the Tempest for rain

Yes I'd like to remove them however many clients really like the features, particularly the 5-day. It just sux that Crestron cannot keep these things going... Eventually we'll be forced to delete all

Yep.? Clients are just asking for the controls to be removed.? We are just not including it moving forward, reliability is a must in this industry.

We now have 4-5 sites reporting Weather App issues... iPads of course still work on these sites, but we're seeing issues on x70, x60, and x52 panels. these sites have been working without issue for

i guess both work, is there a reason to use 1 or the other?

I would use git/github in this scenario and create a branch at the point where I want to go down a different path. I can always switch back to main/master branch or if the client decides to go with

I've had similiar issues myself.? Recently, while working on a project with a CP4N, (everything on control subnet) using system info to connect to a processor to load code was extremely slow.? In

Thank you.? Working perfectly now.? The help screen for that wasn't much help.? It only briefly mentions 0 and 1.? I was totally thrown off trying to use the digital inputs o1-o8 and not getting

Hi All, Anyone know how to undo (default) the speaker profile setting on a NAX. We set one zone to a profile to test it, and now we can't undi it...:(

Thanks. Shelly has such a wide range of power monitoring devices you really need to look at your specific requirements to choose the ones you want.? The pro level Shelly devices are din rail

Old CNX keypad... free

I've found that some 4-series issues can be resolved by initializing the processor and resending the code. Seems like that clears out some glitches. ("restore" doesn't seem to be necessary) If I

I have a client with (10) 1060's that just reported issues also...:(

Regarding Shelly, maybe Jay Basen could weigh in on the integration possibilities, as he is the Shelly Sensai!...:)