开云体育

Hope you all keeping well. Does anyone had done a calendar based event trigger in SIMPL programming and VTpro xPanel? Like i like to trigger event 1 on specific date at specific time and then event 1

Also don't forget Cresteon Fusion which will pump whatever data you pick into a SQL table and the you can construct your data into PowerBi, works great for generating bigger pictures about system use,

Hi, Do you still have these modules?

Here it is! -- https://github.com/chipguyhere/SimplDiagnosticSend ( https://github.com/chipguyhere/SimplDiagnosticSend ) I just barely put it on GitHub this morning.? Any issues let me know.

Hi Tony, I'm not sure if this really applies to your case, but I pulled this from my notes when I was trying to break audio from video when dealing with NVX360's on both ends (encoder and a

Is analog audio mode set to extract?

Check that the audio mode is set to extract instead on insert. Go to the settings tab and the the routing tab, you’ll see the audio mode section where you can make the change.

Take a look at the web UI of NVX. I believe there is a separate drop down/destination for the analog out. If I am right, there should be one in SIMPL too.

Which debugger is that? Could you share more info about it?

Do you have this in GitHub? I’m interested

If your program is not too busy and you just want to watch some signals in the debugger without the annoying logoff send this command in the text console: SETLOGOFFIDLETIME 0 This won't log you off

I wrote 3 SIMPL+ modules that will let you pipe an unlimited number of signals out to a single TCP port, and then I wrote a Python script for an external computer (RPi, PC, etc.) that will consume

I agree with Nathan that any debugging is not appropriate for your app, and DEFINITELY NOT CRESTRON DEBUGGER!!! I highly recommend Nathan's debugger, and no, I don't get anything from him!... :)?

Hello Elliot, You can try using C5 Debugger ( https://jaylia.net ) to continuously log events, but its not really the recommended way to do it. The best way would be to create a custom library that

I'm not a full-time Crestron programmer; more of sysadmin, trying to build more robust observability into all of our room designs. The signals in SIMPL debugger are quite valuable information, and I'd

I'm trying to route audio from sources connected to a DM-NAX-8ZSA, to the analog audio output on a DM-NVX-360.? I've gotten it to work through the NVX's HDMI output, but nothing from the audio

Is there someone have experience to control a Cignal Setupbox. I don't have an IR learner and I am just wondering if someone have an IR file for the said setupbox Please find the below link for

Only thing to keep in mind. If you want to load the MX850, you will need to first connect to the ML-600 via Toolbox then once it is recognized, you would disconnect it and connect the 850MX and hit

The URC850's and the ML600's are functionally identical.? And you can load the VTP file directly as if it were an ML600 IME.

Thanks for the feedback on remotes, I will stick with the ML 600's and down the road maybe go with the TSR 310's in the future once the ML stop working. Just curious our the MX850's an upgrade to