开云体育

For control on AppleMusic, AutonomicControls and Sonos are the 2 that come to mind. I played with the Autonomic ARM unit that will be needed, when it was in development and had AppleMusic to test

Thanks Chris and Eric for your help again, ?I have created a photo album label Oil Country you can refer to. Now I am questioning how I designed and built and wired my system 15 years ago? ?I

Hi, I'm not aware of a way to control Apple Music with a Crestron system but there are other people who are more up to date than I am on subjects like that and may be able to chime in with a solution

I am getting only feedback, but I am not able to send commands to arm the System. Is not a wiring problem I tried with a Crestron Home Processor, and it works great. Any ideas what it could be the

Thanks Jay For my system I currently have on my ML 600's of course all my Audio Video sources control, and all the controllable lights within the house. ?Each ML 600 currently is programmed for the

Hey All, I have a touch panel in a public space and want to be able to show only "favorites" as an option on the media player smart graphic. My question: is there a command I can send to the MMS1E

I don't know why that is but it is important to know

It was integrated about a year ago and has been solid

Yeah, the first Roombas weren't smart enough to figure out that your puppy left something on the floor that should not be vacuumed up, if you know what I mean. We learned the hard way LOL

If your system is just for watching TV and streaming video then personally I don’t see value in a 2-way remote. However, if your system includes an audio source for listening to music and that audio

If you're trying to make HTTP requests, it's a little more complicated. See https://crestrontutorials.blogspot.com/2006/06/requesting-content-from-web-page.html Appending strings is not

I might be building my own Crestron DSC driver pretty soon out of need, similar to my Interlogix NX-8E interface (which I’ve improved significantly since I last talked about it) the bulk of the low

Thanks Eric and Jay so far greatly appreciated, Great points you both bring up about the range of MLX's remotes compared to ML 600's and 418 Gateway.? I just assumed the newer tech would be even

Crestron suggests only 20 devices or 1000' per cable or cresnet segment. This has nothing to do with power and everything to do with communication. The more current the processor the more I have

Agreed!!!

FTR, power supplies and Cresnet Hubs are not the same thing. The PSs are of course to provide sufficient power for various devices (Four 75w PSs seem to be ALOT for a lighting system, unless this is

Don't be so quick to throw away the ML-600 remotes.? I think they are the most bullet-proof remotes that Crestron ever offered.? I still use one in my own house because it simply works 100% of the

Crestron had a lot of issues with that remote, the resolution was to use a single remote per gateway. The ml600 communicated over 418mhz. The MLX-2 is using 2.4ghz. 2.4ghz has no where close to the

Biamp cornerstone support has documentation on how to create a connection with a Crestron processor and how to send commands. I recommend searching “crestron” on their support site.

I found a few more files and created / uploaded another IR file (Somfy Stewart screen). Stewart used to post their HEX files, but that appears to have stopped.