开云体育

anybody knows what happened to the GuiFX store ? need to recreate a panel but don't have the templates. thanks in advance

Hey Guys, I have the HaikuFan v2.1 Module but, what I have read this will not work with the newest firmware with BAF.. Does anyone have a updated Module or any other way to control? Thanks!

I also found this topic on GitHub: https://github.com/MiSchroe/klf-200-api?tab=readme-ov-file I don't have experience with Simple# but I believe this link will be clear for all guys experienced in

Hello, Has anyone succeeded to create a module to control the VELUX KLF200 interface? I have found a technical document for the product's API but need help to create a Crestron module for it. Link to

Would you be open to using IR commands via TCP/IP? This would allow you to access the menus but you won't likely get much in the way of feed back. Check the files for LG Signage Monitor and Signage TV

The following files and folders have been uploaded to the Files area of the [email protected] group. * /Aja Kumo.zip ( /g/crestron/files/Aja%20Kumo.zip ) *By:* Sopheap OUK

Hi Jay, Thanks for sending this.? I'm not currently using my Bond Bridge, I just have it for testing.? I haven't played with it in a while but the last time I did, everything was working fine though

Hi Stefan, as already mentioned, the charging issue is most likely an E-Marker issue, so that the card demands more than the chip in the cable says would be safe. USB-C can be used for charging up to

I popped on one of those adapters and instantly connected.? Have a perfect image but no audio.? Guessing it's a setting in the Mac as I have audio from the 1/8th headphone port on the video capture

I pulled this data yesterday, I set up 3 separate programs on a DIN-AP3 and got the following.? I really appreciate your insight on this one.? I'm not good with the S# stuff. Program 1 - Bond Bridge

Me personally, I wouldn't... I would recommend troy Garner's NS update service. its simple, inexpensive and will get you moving forward quickly... Newtonsoft Module Update Service | TBD Enterprises (

https://community.crestron.com/s/article/id-1000527

Hello Juan, Here <https://drive.google.com/file/d/1jXmlozyEqmXVxcb5iNrql43VA-zNTDou/view?usp=sharing> is the link to download the SimplSharp library I have made for the Magewell Pro Convert Decoder.

I've never used a Crestron Certified Driver.? Are those hard to implement?? I typically use the Roomview Connected Display module which does power and input select since that's normally all I need.

Again, being a Newby I had to get some help in importing it into the list as a module, but now that it's in there, the Help file (F1) said to email you. Can you provide a more finished Help file on

Also keep in mind that older firmware will not allow you to successfully forget a SSID- it will still keep latching on to the first one you setup. Even after an init/restore sometimes! This was fixed

The "11 times" reset procedure is ridiculous, 21st century attention spans are just not compatible. I'd really like to have "words" with the genius who came up with that idea. Was 5 times not

Yeah, the CCD actually works pretty good and seems to have anything on board what you need. What?s missing? Thorsten Von: [email protected] <[email protected]> Im Auftrag von rickwookie Gesendet:

You can control it with the integrated rest api via network https://www.aja.com/support/item/9616

You won’t get that to compile. This has been an issue for a while since Crestron broke support for the old Newtonsoft. However, I’m not aware of any signal present in that old module that isn’t