开云体育

I can confidently confirm that indeed the R- terminal on the 8ZSA is the positive connection. This is extremely important when dealing with a situation where a wire was cut somewhere between the

Same here. The one Control Works (AJA) is offering costs $300. If anyone has written one (especially for the KUMO 1616 SDI), I'd be extremely grateful, since I'm still pretty green at

I've had something similar happen where I needed to stagger the visibility joins so that all the items would show up. [email protected]> wrote:

So I'm having an issue where only the top few items are drawn. The visibility of individual items on a subpage reference list is controlled. The reference has 1 adv. button. Text on the button are

That "chip" is a USB E-Marker chip. It's supposed to simplify connectivity by comparing the requirements of the source and the sink, as well as the cable's capabilities, to ensure power and data is

So, I have been given an official answer from True Blue, and it is that it was purposefully designed this way. They didn't explain exactly what they were doing inside, but it is very interesting

Thanks.? It's the OTG part of that adapter that makes the difference.? After scratching my head with a pitchfork for a couple of days, I cut open the "C" end of one of my cables and sure enough,

Aqara designs and develops hardware and software solutions for the smart home.They have over 12 million customers in more than 170 countries and territories.My latest article, "Aqara’s Hub M3 is a

That was a thought that I had, but other "real" amplifier manufacturers use the same terminals for bridging. They handle it by using internal relays when bridge mode is activated. Internal relays seem

Hi Folks, I never worked with those amplifiers, just guessing: this is related to the usage of bridge mode. In bridge mode, the loudspeaker is connected to the positive output pin of the left channel

Perfect.? Thanks Jay

Going down the rabbit hole on this Mitsubishi heat pump has led me to discover there is a serial port under the cover meant for a cloud integration accessory and somebody has worked out the protocol.

Thanks for the reply, I’ll make the suggested change and post what I find this weekend. Jay

Me more than you!..Haha!!! I have my crack team looking into it...this is a head-scratcher!!

Hello All, Maybe someone can shed some light on this one! So, being an old fart in the industry, I may have dealt with cut wires or drywall screw through a wire just a couple of times

In Xpanel it is not possible to visualise any stream, in TSW panels without problems, you must in VtPro select Source ID H.264 of Embedded Video.

Hello, Do you have any feedback on using RTSP streaming on an Xpanel/TSW interface of an AVER camera (550, 520, PTC310...)? According to the manufacturer's specifications, the RTSP stream is H264.

Hello Sébastien I have only managed to make button changes, which allows them to be made without registering, but I have not been able to register according to the API, I don't know how to do it. Do

Hello Juan, Everything is done with http requests using the documented API. You have to login first to get a session Id. This session id has to be stored in the module memory. You have to use it as

I actually spent some time on this Mitsubishi HVAC this evening.? I got an ESP32 Arduino to talk to it.? It acted as a UDP Server, and upon UDPSending it text like "ON" or "HEAT" or "72" (a