开云体育

I've used this? with Home and it work fairly well, https://chowmain.software/drivers/crestronhome-zankremote#documents Not sure if they have a version that works with Simpl.

Has there been any updates on a Crestron SIMPL driver being developed to work with the Nvidia Shield Pro?

Nobody I know enjoys mowing their lawn or vacuuming their homes. Robotic mowers and vacuums are, in many ways, similar devices as they both these smart home robots incorporate navigation and

https://help.crestron.com/cs/main/Subsystems/index_SG/Content/Keypads/DPad.htm The content of this email is intended for the person or entity to which it is addressed only. This email may contain

You can give it a smart join number and then import the smart object, or you can give it single digital join and it uses the next 4 joins. If you look at the help for it, it explains this.

I'm missing something here.? The dpad is one object that controls 5 functions.? Up. down, left, right and ok.? I'm not seeing how to attach 5 different join numbers to it.

I've used dozens of these and they work fantastic. You can get them slightly cheaper through SnapAV/Volutone. https://www.amazon.com/DoorBird-2-Wire-Ethernet-Converter-A1071/dp/B0789HZ79P Michael

Thanks Michael, I agree totally with your assessment. If we set up a FQDN with DHCP and DNS on a server, everything would just work. I will say that with Crestron's stack implementation, SSL does work

Hi all, I'm working with Cisco Room Device Driver 7.0002 Is there any way to add an entry from "Call History" , Recent calls , add this to local phonebook (Favorites) -Like you can do in the Cisco

This may or may not apply, but my experience outside the Crestron world is that when you go from a hostname to an IP address, you have a chance that it breaks SSL, because the SSL certificate contains

I was using two X300 amps just recently and used the second ethernet port on Amp 1 to feed Amp 2. I was was getting the "Connecting" message you were speaking of on Amp 2 trying to stream the AES 67

We are having all kinds of issues with this at a home right now. However, ours is actually behaving a bit differently than yours. For some reason, we can't change the hostname to a static IP

Hello... Following the recent(ish) upgrade to CH which allows a Home processor to deal with devices across VLANs, we have implemented VLANs on a larger site. The site was running multiple NVX devices

I found this on online help... <https://tyconsystems.com/homepage/shop/tp-dcdc-1248/> Supposedly tested by true blue. I'll know soon and will report back.

I had good luck with WyreStorm MX0404-HDMI. Supports IR, Serial and IP control. I requested drivers from support and they sent them over. Looks like they use Janus Technology to develop their drivers.

It is per apple id. Family sharing does not work. Probably best to get all the devices signed into the same apple store account when you download the app.

We use this, it comes with 2wire to BNC adapters so you can use the YZ pair in the cresnet cable.

I'm getting a handle on this.? Reusing old screens still involves a lot of adjustment via smart graphics and I don't think a ton of time will be saved going that route.? Might as well start from

Anyone else noticing more of these errors after using the new app/updating to 1.8001 in the error log? I don't recall seeing them before: 28. Error: LogicEngine.exe [App 1] # 2024-04-20 14:13:58? #

I think I got it. Upgraded toolbox to the latest version and it's OK now. It was not that old and it was working from the day of the installation two years ago. The firmware in the PRO3 is the same