开云体育

Unfortunately im controlling faders, mutes, and aux levels so i was looking for something that included level feedback since the end user will be using our touch panels for control through the

I did a Roland switch a few years back, I didn't have a module since all I was doing was recalling presets, selecting inputs and performing an Auto Take. The protocol was pretty straight forward.

Does anyone have a module for this? I could really use it. Thanks in advance.

This is a related problem, but not the same... however I think this solution may work for 4 series too. In a 3-series I have the same "Link Lost" problem with the communication with a HomeworksQS

The NVX and NAX streams are passing through the next work just fine. Extreme x440 G2 switch.? ? IGMP is doing what it should be doing. The problem is simply the D30 stream location won't change when

In all likelihood, it is a network issue. NVX and NAX need very specific network setups to pass the video and audio streams. Also, look at the thruput on switches, is critical. We have switched to

Hello all, I am being asked to recommend the latest, best Google TV device for a client to Chromecast and operate apps similar to Apple TV but for Google ecosphere. What should I tell to get and what

Hi Remo, Happy to take a look at your request. Can you can contact us off list at support@... and we can take a look? Caleb Caleb Radecky | Manager, Online Products & Services Crestron

Good morning! We need some extension/driver developers for Crestron Home in Brazil. It would be a driver for an HTTP gateway for a thermostat. We will pay for the service. Can anybody help me? Thanks!

Yes you are correct here. That is the traditional RS adapter. And I know they still work as we had a Jandy system last year where we added one of those in as we had one left over and it worked fine.

Long time Crestron commercial dealer here. Building a new home and am currently staging my personal residential system prior to move on. Never tackled a CH system before. Everything is working

Hello Anewdaytotri, Thank you for the info and example code for the Z6!? I've been handed a job using a S6F Planar and the protocol looks similar but the S6F manual only mentions UDP connection. I

Connecting via USB solved both problems? I now have access to both Pro3's.? I also noticed that when I clear MSG aka ERR via USB the led stays off when I disconnect. Now I just have to figure out

I think the product we see on Amazon when you search "jandy rs serial adapter" is the genuine original interface, not an aftermarket -- the relationship between Zodiac and Jandy is one of merger and

Thank you all for replying.? I wasn't expecting this much feedback but I appreciate all your feedback. It good to know that even though the Jandy RS adaptor isn't made or supported by Jandy anymore

Oh that iAqualink module really stinks. Would really love to have a module that communicates locally without all the delays. The iAqualink app doesnt seem to have those delays. We had a client that

Yup I have had the system key change on several PRO3s simply due to power cycles. And some on Init/restore. Completely ridiculous as it can take hours for them to supply you with a new one. In my

You can usually get the code back from a c# .dll if it is not obfuscated using c# de-compilers like JetBrains DotNetPeek

Also curious about this, as we have 2 dm frames connecting to each other in a lecture hall enviornment (1 at rack, and 1 at teacher station).. The mic is fed via a bnc or dvi card, and runs on the

I have 2 Legrand daker dk+ in my rack which should have a couple of their sockets toggled on a touch panel, I've looked everywhere and cannot find neither a module nor clear information on the