开云体育

Anyone out there controlling ST 2110 Nmos routing from a crestron processor? Josh

Snowing No, Raining Yes.? The rain sensor on the tempest is haptic so it can't detect the sound of snow hitting it.? The only snow sensors I'm aware of are those that are sold with driveway/pathway

Has anyone actually tried it ie getting the firmware link off the 2n website and uploading it to the hardware ?

Jay, Does the WF unit/modules give local weather triggering, like 'its snowing'?? Also, does it provide any predictive info??? (I'm thinking not on this one...)

I came across the Control4 variant recently. I too was told by Axis support that you cannot reflash it to get back to the "standard" version which includes the Crestron RAVA stuff. I don't believe

i have the same problem, the IP-TABLE erase after device reboot

If you want hyper local weather conditions l highly recommend the weatherflow tempest smart weather system. There are free modules on my GitHub Hope this helps Jay

Use the Creston Weather module, in the touchpanel interface module, either use the text string out or the current icon mode out to drive your logic. Crestron Weather Module

I have a client that wants to trigger roof heaters based on weather conditions.? Basically, if it is snowing.? I'm not necessarily looking for a free handout, but am curious if someone has done this

OLD modules are DEFINITELY BETTER!!!...:)? ?(and not just because I'm old!!) It's good to hear that ELK is still a good option...? What issue have you had with KPD emulation?

Load the SG XPanel Web project to the processor from VTProE or Toolbox first. This will issue the CSPROJECTLOAD ( https://community.crestron.com/s/article/id-1000490 ) , WEBINIT cmds behind the

That's good news, assuming the new modules are at least as robust as the old ones - and they're not "Crestron Home only" :-)

Well, they are restricted - that?s the reason why they are cheaper. You get what you pay for. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von johnh via groups.io

My programmer Gary Miller is more familiar with the issue. He should see this and respond.

Just spoke with Elk last week about the new EZ panel/system. They are actively working on integration modules and they should be released right around the time the panel ships.

CK I was recently evaluating an Elk M1 Gold as a replacement for our security installs. Once I got past the few initial hurdles integrating it with Crestron it seemed to work flawlwssly for me. Yea

Not possible. We had this same situation this past year as our sales guys ordered them thru Savant because they were a bit cheaper. Well after many calls with tech support I was told you cannot flash

I'm having an odd issue on site. SIP calls are taking a very long time to connect. This is a corporate SIP system and most of the information about it is not available to me. The client has provided

What problem did you run into with the ELK module for a 4-Series?? I don't remember any issues when I went from a 3-series to a 4-series when the 4-Series first came out.? I've been using an ELK

Just integrated with Elk today. No issues other than we had to compile it for a 4 Series, as the module was older than god, and it would crash the CP4. Took a while to figure that issue out.