开云体育

I might add there is a critical firmware that came out for the? CLW-DIMUEX that came out last month (v1.002.0006).? Make sure your? CLW-DIMUEX firmware is up to date.? According the the release

Only SIMPL, Never HOME!!...:) there are only about 25 devices on the GW, but some of our issues are seen with the program disabled and the gateway powered down...

I?m experiencing the same issue with dropping debugger sessions. One CP4 was installed 2 years ago. I?m servicing this unit remotely via VPN connection and always had the VPN in mind as a possible

While I have an older metageek WiFi spy analyzer, I usually find the RF scanner built into the CEN-GWEXER usually is good enough.? Just open a console to the CEN-GWEXER and execute "SCAN".? It will

Simpl or Crestron home? How many devices on the gateway?

No, This is a house where certain old AND NEW dimmers will not acquire at all. And there there's the interactions with 2 dimmers in the same box - one works normally and when you turn the other one

Chanalyzer 6 and a packet capture tool? ?Shop MetaGeek Wi-Fi Testing and Analysis Tools | | | | | | | | | | | Shop MetaGeek Wi-Fi Testing and Analysis Tools We create technology that improves WiFi

Wouldn't happen to be HR devices falling off the gateway and not coming back up would it?? That seems to be my theme today.

Hi All, What are others' recommendations for an RF analyzer for EX trouble-shooting?? I have a project that seems to have big ghosts causing very weird behavior that I think may be RF related... TIA!

I've heard it's still a pain in the ass to integrate, and it's not a solid integration.? I have a client who has this in their house, and has wanted me to integrate it for months, but their security

Just reviving this thread as I have another client interested in NEO integration... Dare I ask if anything has gotten better on the NEO front??? last years' posts seemed to indicate mostly

I just dealt with this yesterday and the analog value certainly sucks for volume control. Ended using the knob direction signals to drive an OSC to trigger the volume up/down and it was a much more

Hey Jon! I have a job with a Quadview UHD processor and I'm talking to it on port 23 with a 1 on the TCP/IP symbol and it seems to be fine. I'm not sure if this is the same as what you have. Here's a

Has Anyone used one of these Spectrum RGB units (any similar model) and willing to share a command like Preset 1 or some other example to see the formatting? Tech support for Spectrum (nothing to do

I'm trying to launch the SONOS app from an HTML project loaded in Crestron ONE. I've tried the following alternatives but none of them worked: * HTML link tag with the URL schemes as reference: <a

Hi, Try to use an oscillator to control the number of volume steps. Something like hi time 0.2s, low time 0.1s.

we have determined that this is an SSL issue we have older systems with the same code base and not using SSL and the mobile app connects quickly

Do you have anything funky in the project's build events?

Worst case just build the http commands in a s+ module. Theyre pretty easy to make. I do not recommend purchasing a module that is easy to create

Does this site have remote access via VPN? Maybe one of us here could take a look for you if we had access to your code and could run debugger remotely. Or jump on a teamviewer session with you.