开云体育

The remote works but when using directional buttons up and down in guide fast or holding them down to repeat it doesn't work very well , wondering if this is because of the connection.? or the fact

I feel your pain and share it too. On-site with CP4, latest FW, latest TB (although DB's are not latest) Just went to upload a program change to slot-01 and forgot to kill the program. I waited, and

We use Ruckus they work just fine. I would recommend setting up a separate SSID on the AP nearest the remote's home. These 310s dont roam very well so that way you can lock it to a particular AP. You

Run WIFISETUP FORGET and that will remove the current AP. Make sure your firmware is up to date because that command was broken for a long time and they finally fixed it recently. I had a few cases

Interesting to hear that you are having problems with 3-series... I'm experiencing absolutely no issues with my lab PRO3. In fact, it is a joy to work with (running v1.8001.5061.27527-Nov 10 2022 and

Hey does anyone know the best access points to use with the TSR-310 remotes?

Is there any chance that there are network cables that fail testing along the way?? Once I caught an issue like this that turned out to be a miswired Ethernet cable (like it went 12-34-56-78 instead

Yup...until Home crashes under its own weigh like the previous 12 'wizard' apps they've had over the years...then all of a sudden they'll want us again... (And yes, HOME is the 13th 'wizard' since

bump...

They have better Homey things to work on then worry about our side.? Its a shame.

could agree more the "brain trust" still charges for an app oh and you can't even download it GREAT play... join 2024 and give the app away it's worthless without tens of thousands of dollars of

It's fucking insane that it takes literally YEARS for Crestron to get this out. Hell, even Savant,an Apple based system has a working Android app.

I just had another client ask me about this yesterday. Not to mention my own phone (Pixel 8 Pro), and my wife's....

On the panels at issue, when I depress the new buttons, they do not engage ie active inactive,? so in Debugger, the signals do not show up. With the panels that work, Debugger shows the signals in

2024/2025 or ....?

I recommend you use Simpl Debugger to see what is happening when you press the buttons in the iPads that are not working as you are expecting. My guess is that there are some issues with the code. If

Thanks but the ipads are receiving the new updated graphics programs. And yes I have to load each one directly but thats ok. The problem is that the two in question are not recognizing the updated

FTR, Use Local file=ON means that you have to load the graphics file directly to each iPad. if one/more still have the old project (i.e. not the new project) you'll see what you're experiencing. If

I actually recently did this... In short, the CresNet buss isn't shared all the way through,? so I used the existing 300wPs, for a connection to one port on each row. Below are my notes from the work

The Use Local File is set to on in all four panels. By changing any of them to off, the program will not run. So must be something else. Thanks for the suggestion though.