开云体育

I actually recently did this... In short, the CresNet buss isn't shared all the way through,? so I used the existing 300wPs, for a connection to one port on each row. Below are my notes from the work

The Use Local File is set to on in all four panels. By changing any of them to off, the program will not run. So must be something else. Thanks for the suggestion though.

Make sure the Use Local File is set to off , in the crestron mobile app of those two ipads

Dustin, This looks incredibly promising, thank you for sharing! I have also initiated a feature request with Renewed Vision for the ability to send arbitrary strings to a TCP/IP device which was not

Have a? 2 series processor (MP2E) and multiple Ipads. The ipads all have the same VT program in them but when I added in a projector (IR Commands) to simpl, the two ipad mini panels do not "see" the

I second replacing it with a couple of DIN-HUBs and DIN-PWS-60's. This is where I find the restrictions on the DIN-CEN-CN's terribly unfortunate.? It makes them almost completely useless for a

The PAC2 had a built in Cresnet Hub (CNX-HUB equivalent) – I would probably recommend getting the PAC2 out of the equation as a point of failure and replacing it with a DIN-HUB or CNX-HUB) but if

Hi Bruce, I have a couple of PAC2's I'm considering the best path on as well -- I am convinced that those 8 Cresnet busses (A thru H) are electrically isolated from one another, and the processor

If I'm understanding what you are asking, you could just use a CNTBLOCK with the internal power jumper cut. That would isolate power between the two sides but still let cresnet data pass between the

I will be updating an ancient system with a PAC2 and CLX dimmers and CNX-BXX keypads to Crestron Home in a few weeks. There's a load of the field Cresnet wires landed right on the PAC2 on its many

Im able to do this manually. I was wondering if anybody had a way to accomplish this in Crestron Home. Thanks

Don't know about CHome, but to do it manually: Enable AES67 on the Dante device in Dante Controller Create AES67 mcast transmiter (must be 2 channels) thru DC and take note of the mcast IP Enter the

Is there any solutions to be able to start a AES67 stream from Crestron Home. I have a secondary processor running SIMPL so I can trigger what's necessary to start the stream. The issue I'm running

Hi All Happy New Year was this ever resolved? or do we still need to stay on old Data base? Thanks

I put together a very quick demo of receiving note on/off RTP-MIDI messages directly in Simpl from ProPresenter on a PC. Since you're on Windows, I assume you're using the rtpMIDI app from Tobias

I get that. They were overly PC as well, and I begrudgingly accepted that we were moving to Mac in that venue. I suggest looking at https://benjamin.kuperberg.fr/chataigne/en as an intermediary with

Thanks Caleb, Migrating to Mac is right out. We are a Windows house with next to no Mac experience - having bought a Mac at home to replace an ageing PC some years ago, I do not want to go through

Sorry I see that you said Windows. Recently I ejected a Windows ProPresenter PC for a MacStudio because Renewed Vison crippled external control on the Windows implementation. At one point I did have

Hi Phil -- Ok I had it completely backwards.? You want to not send midi, but receive midi, and networked rtpmidi is your only choice based on what application is going to be sending it. And I'd agree

The ZIP filenames don't match the firmware versions, which makes it more confusing.