开云体育

Sorry I see that you said Windows. Recently I ejected a Windows ProPresenter PC for a MacStudio because Renewed Vison crippled external control on the Windows implementation. At one point I did have

Hi Phil -- Ok I had it completely backwards.? You want to not send midi, but receive midi, and networked rtpmidi is your only choice based on what application is going to be sending it. And I'd agree

The ZIP filenames don't match the firmware versions, which makes it more confusing.

Are you using Mac ProPresenter or PC ProPresenter? Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC |

Thanks Michael, Whilst I do have plenty of Arduino experience, the Windows version of the program that I need to communicate with (ProPresenter) will only send external cues via MIDI - rtpMIDI to be

experiencing the same with Pro3 on current versions - database, simpl, etc ...

Ah, yes - thanks for the heads-up on the latest version. Just downloaded. ? Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von ckangis Gesendet: Dienstag, 9. Januar 2024

Hi Thorsten, I just found it in my spam folder, Thank you!!? I actually received a later version (2.1.10) from another poster so I'm going to work with that (though there's a few things I need to

Hi, JFYI – i sent you a direct mail a week ago. Hope that find you well. Just checking via the group. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von ckangis Gesendet:

So This command will allow me to add an SSID reference. Does anyone know how you can 'Forget' an old SSID reference? I'm meaning remotely, via Console... TIA!

So I went down the rabbit hole on this because I have been interested in doing something like this myself. I know that this is not *rtp* midi, but on the other hand, every single MIDI device I have

yes, out of what I used the only thing I noticed was the volume fb. I have edited the module but only for things like volume ramp speed and analog volume input.

we checked & Samsung displays worked with direct connect to CP4 sent thru Atlona boxes. nothing at display - these flashers had visible flashing so easy to check wiring is pretty simple what are we

If it were me, for a purpose like this, I would buy an Arduino-type board, put a MIDI adapter on it (such as MIDI FeatherWing), and ask ChatGPT for the code to (as an example) "send program change 5

Hi All, Has anybody implemented rtpMIDI in Crestron? I want to send MIDI messages from a Windows program called ProPresenter to trigger automation cues. -- Cheers Phil

Thanks Greg_B, and ckangis, Odd, that was the first Module I try'd, and the RS232 had been work'n previously, so I was stump'd it wasn't going smooth. So then I invested in Changing to the IP

We're working on a project that we've been seeing noticeable command lag when commands are send via IP to a device (AVpro end-points and Sony TVs(IP control) ) We initially thought it was something

The Consumer Electronics Show (CES) is not just a show where new smart home devices are announced by manufacturers.? It is a show where new home health devices are shown for the first time.? Both

Greg B, You've used this module successfully in the past for ZA (and AZ other than Vol_FB)? If so, I might try it and customize it (it does way too much!) as it is just S+ and it actually includes the

I know this may be late but I have been using the STR-ZA3000ES module for the application market, It does appear to have the volume fb issue others have mentioned, I guess I just didn't notice it the