开云体育

I believe that's only applicable when they are in standalone mode, not functioning as a USB device. stevebutterworth@...> wrote:

Never controlled them but fitted a few units.? ?There are multiple ways to connect them, one of which is via Network and using a Tap Touch control panel which is IP-based, so I'm guessing there must

Don't the UCs talk over USB? wrote:

This is what I am trying to track down. I know that all of the Crestron UC kits talk to the unit in some way. Therefore, there is a command set. What that command set is a mystery. But as I said there

Which Crestron platform can control RallyBar via IP and where/how do you set the IP connection?

Has anyone had any luck wrangling the API for the Logitech RallyBar from Logitech? Their support has no idea what I am asking for however it has to be available for developers since there are multiple

you can try telnet, ssh and snmp, all of them worked for me

CP2E system I got tired of resetting the clock after every NoCal power failure (have UPS but we don't run gens at night) so I inserted the NTS module into my program. It works great except that when I

I've controlled one. It was just telnet to the box, and an SIO with CLI commands and responses. Nothing crazy. Client wanted to turn on and off POE to ports. Caleb Radecky | Manager, Online Products &

What are you trying to do with this switch via programming?

I have not had a need to but IIRC they have a CLI that is similar to Cisco IOS (but just enough different that it really messes with your muscle memory…) so in theory you should be able to SSH in to

Hello and happy holidays to all. Is there a module to control NETGEAR type M4250 switches? I saw that there was the CEN-SWPOE-16 module in the crestron module library: has anyone already used it on

Hey Ryan, You can find an IR Driver for the Sony BZ30L range on Crestron’s Certified Driver website. https://drivers.crestron.io/rad/driver-search/5037%3Fmodel%3D9257 Cheers,

I can corroborate that...unfortunately.

"POWR 1\x0D" Sorry, fat fingered. ________________________________ Sent: Saturday, December 23, 2023 1:08 PM To: [email protected] <[email protected]> Subject: Re: [crestron] Sharp 4P-B86EJ2U

My experience with Sharp displays is that the power commands can be either "POWR 01\x0D" or "POWR1 \x0D" for POWER ON and "POWR 0\x0D" or "POWR0 \x0D" for POWER OFF. You may also have to send "RSPW1

all good. yes, literally POWR? ?0\x0D and POWR? ?1\x0D. Going to resume work on this next week.

I would use RS232 one way driver on an IR port to the 3.5mm Jack. Much more reliable than a bug that could fall off. The BZ range is standard code but make sure you send the enable string whilst the

When you said you’re sending CR, you’re not actually literally sending that are you? Should be \x0D (apologies if you knew that already!)

yep. did that too. im kinda at a loss