开云体育

If they are using a different network to connect to the internet than the one to the devices, it is likely due to routing priority or IP settings error. The connection to the device needs to have a

Has anyone experienced issues running debugger on a remote pc through TeamViewer? I connect to a ton of programmer and tech PC's with TeamViewer to troubleshoot programs with debugger (we're a CSP

The you need to share all your code, I tested it with the strings you posted an it worked fine, H came out as 72…

No GETC didn't do the trick either

I would appreciate the IR file for sure. I'm going to be digging into this over the weekend. TIA ________________________________ Sent: Friday, December 15, 2023 6:58 AM To: [email protected]

Has anyone worked with the newer Strato C players? More specifically, we were hoping to automate the kaleidescape by calling up a script however I am not seeing that an as option in programming.

FYI, My client and I just figured it out!! Because the goal of device manufacturers' is to have only one button to rule them all, Fios has removed the 'Replay' button and now uses the 'Nav Left'

Bump!

I just put 5 of these in for a client yesterday. 2 of them are being replaced by spectrum because they wouldn’t grab an IP address. I was able to get IR control working for them, with the unit

ATOI will only convert numbers within a string to integers, for exampl "HELLO55" would return 55. You want GETC, so your code should have: *iLevel = GETC(cTankValuesLevel[temp]);*

No See code below, In this instance the level meter is responding with / // ?\x02\x01\x0099\x00\x16\x01\x01\x0D // ?\x02\x01'H\x04\x19\x01\x00\x0D

You mean ATOI does not convert string to a decimal value? [email protected]> wrote: -- Best Regards Eric Low

Having a rough day, Nothing I try is working. I'm pulling this string apart. \x02 \x01'H\x04\x19\x01\x00\x0D stx,TankID,Sequence,Level,SignalStrength,Temp,\x01,\x00,etx Everything is Working as

Thanks Tony, I'll give a try and let you know. This stream box is a Xumo which as I understand is used by Comcast / Xfinity and Comcast / Spectrum. I've got my fingers crossed. Thanks again, Steve

Doing my typical Dropbox Enable Offline, Disable Offline for the day as I have about 10x too much in storage to locally house files.? I was watching the Dropbox sync function and noticed something.

rmc3 w/1.8 firmware = 51% used 1.6 firmware 31% used after initialize on each

System Info hangs at about 50% for a while before usually completing. I am seeing that on 3 Series processors as well, so I expect toolbox is a component of this.

Yes, thank you. Any hardware suggestions? I don't have any older PC's laying around but I do have a 2010 MacBook Pro that I could look at using virtualization. Initially I was thinking of grabbing a

Running a x64 OS on a M1 is slow.? It does work.? I have an old i7 pc that I run virtualization on that I run VC4 with.? As suggested by Joda, when it expires, just build another one.? While the

It seems that any comms between toolbox and a 4-series is suffering. I'm working on a 25 apartment mdu. All on latest fw. Every single CP4 struggles with sysinfo or debugger loading. Sysinfo can be