开云体育

Hi, I took a quick look at the driver and their latest API documentation.? The driver was written 4 years ago for Kaiterra's Laser Egg models of IAQ monitors (which it appears have been

Aqara's Presence Sensor FP2 has revolutionized presence sensing with its use of millimeter wave radar.? The sensor is so sensitive it can detect the movement of a person's chest while sleeping under

Have you tried updating the Roku driver to the latest version (driver ID 4976, v2.0700.0001, last updated 10/13/2023)? Reportedly the latest version of this driver deals with this very issue. Here is

Hi, here's a quick how to : install openssl first 1 - create a CA root openssl.exe genrsa -des3 -out Certificate-CA.key 2048 openssl.exe req -x509 -new -nodes -key Certificate-CA.key -sha256 -days 365

Hello everyone, I have the same problem, is there anyone who has gotten it to work? Thanks in advance.

Fairly straightforward but requires authentication with their cloud infrastructure - no local APIs (discussed this with them at length). Uses an API key you get from their dashboard. Clean information

I’m not familiar with the mini but I will take a look tomorrow Jay

G'day all, I've been trying for days now to get a CH5 panel up and running on a VC4 using SimpleSharp. I can get it working with Simpl but I'm obviously doing something wrong or missing a step. Would

I should have checked!? I see that Jay Basen has a code set for the 'Laser Egg'... Jay, do you think that the Mini is just a new form factor and thus your code will work with it?? TIA!

Anyone integrated/created a module for the Kaiterra Sensedge/Sensedge Mini?? TIA!

Sorry John. I’m on the road today. Glad that solved the problem. To answer your question, the bond S#.zip file is the S# source code for the module. Thanks Jay wrote:

Can anyone point me in the right direction, how to generate a certificate? Crestron TB is totally useless! I need a certificate for a NVX and a TSW so the client does not see the message on the touch

Updating to latest version of your modules seems to have taken care of the issue.? Will run it and post back later.

Use an analog to serial. You will probably need to take your three analogs to equ's then to init's to get them to values the atos wants to see.

it need it to be a sting value to send.? you a div mod and some logic I can get the whole value and the remainder as seperate strings and just need to output those 2 strings + 1 a fixed string

Hello Jay, final got some time to try this out.? Simple fireplace On/Off.? I put the IP address into module and local token key from the Bond settings. Is there anything else that I need to do to

Yes this option works and you've to make changes for welcome screen password too. And put your specified application to auto start also.

It might be even better to attach the PC to a UPS and install UPS communication software on the PC. So once the power is cut, the PC will run on battery power and survive a couple of minutes

I will have to check if the setting is available. I thought it was but wasn't sure where to look. This is all valuable information. Thank you.

Is this a computer that doesn't power itself back on after a power failure?? If so, maybe this is the bigger picture problem. That's usually a setting you can change within the computer's BIOS and