开云体育

Use variables.? Set the variable conditions to feedback of a phantom keypad and use those feedbacks in SIMPL.? That is, if you have access to the D3 program.

Yea the only thing that comes across the RSD into Simpl are the virtual keypoad button presses. I've never seen any of the other button states come across (P+H, multi tap, etc). it doesnt send over

How is it setup, export from D3 or export from AV3? What is the press coming from remote, keypad, I/O... I am guessing you are exporting from D3 and D3 has some logic that is preventing this. If you

D3Pro on a pac2 rsd to an av3 p&h doesn't work across the rsd

Are you wanting to control the interactivity functions or just turn it on and off? I would suspect that basic functionality is the same as any other Samsung monitor. Thomas (Trey) Herb M.A. Ed., CTS

Anyone control one of these before?? Rs232? IR? I'm not finding the 232 codes or details with that.

I don't understand anything you just described. EISC is very easy to use and besides signal layout is nothing like crosspoints. One example of where you lost me is your processor/program layout. The

Dear All, I have tried this, a long time ago, with both CG-DMX and Enttec ODE for theaters. I was to allow the control of DALI Lights from the Light Console. I was working but at that time the

During last few months we are having a constant problem with communication between video camera and UC-Engine. UC-MX50-T Crestron Flex Advanced Tabletop Medium Room Video Conference System for

I found it more #Simple then all that. You can use discrete On, just not off. So, I use a D-On for on, and power for off, and throw an interlock in so it only fires the off once, when off is

Hi All I updated yesterday to the Current Device Database 200.305.001.00 and can confirm it broke D3Pro. got to site this morning to load a project I worked on over the weekend and got the error

What Caleb Said... Here's a couple other console commands for slaves: SLAVESTATUS? ? ?Returns Current Slave Status MIPT? ? ? ? ? ? ? ? ? ? ?Returns Slave IP-ID Table Slave mode is good

I would probably do the opposite. The cp3 can run multiple programs and has more ram, where the RMC would need a license for more than one program.

Rather than slave one processor to another, I generally prefer to run a second program on the second processor, and have the two processors talk by EISC.? Especially on 3rd gen processors, whatever

In console, on the cp3, use the ADDM command. ADDM [ip_id] [ip_address] ADDM 03 192.168.1.10<tel:03192168> Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer |

Is it possible to SLave a CP3 off an RMC3?? If so, how,? I cannot seem to see how to set theCP3 as a SLave, eitherethernet or Cresnet.

Can the lighting console send out OSC or ArtNet? ?Those are easier to parse and react to over Ethernet without additional HW. Michael Block

The Enttec ODE should be able to do that. However, i‘ve only used it for sending DMX before. I think the challenge will indeed be to keep up with the data flow. Cheers, Thorsten Gesendet von Outlook

The Chauvet DJ DMX-AN 2 can be used as a transmitter or receiver. I think the tricky part will be parsing the data fast enough.

It very kind of Ben to plug the Ultamation device; but sadly in this case it won’t help as we’re DMX out only as well. ?The old serial CG-DMX-512B has DMX in though.