开云体育

What Caleb Said... Here's a couple other console commands for slaves: SLAVESTATUS? ? ?Returns Current Slave Status MIPT? ? ? ? ? ? ? ? ? ? ?Returns Slave IP-ID Table Slave mode is good

I would probably do the opposite. The cp3 can run multiple programs and has more ram, where the RMC would need a license for more than one program.

Rather than slave one processor to another, I generally prefer to run a second program on the second processor, and have the two processors talk by EISC.? Especially on 3rd gen processors, whatever

In console, on the cp3, use the ADDM command. ADDM [ip_id] [ip_address] ADDM 03 192.168.1.10<tel:03192168> Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer |

Is it possible to SLave a CP3 off an RMC3?? If so, how,? I cannot seem to see how to set theCP3 as a SLave, eitherethernet or Cresnet.

Can the lighting console send out OSC or ArtNet? ?Those are easier to parse and react to over Ethernet without additional HW. Michael Block

The Enttec ODE should be able to do that. However, i‘ve only used it for sending DMX before. I think the challenge will indeed be to keep up with the data flow. Cheers, Thorsten Gesendet von Outlook

The Chauvet DJ DMX-AN 2 can be used as a transmitter or receiver. I think the tricky part will be parsing the data fast enough.

It very kind of Ben to plug the Ultamation device; but sadly in this case it won’t help as we’re DMX out only as well. ?The old serial CG-DMX-512B has DMX in though.

Crestron CGDMX512-BI, unfortunately discontinued, maybe get a used one... Best regards Crestronfreak55

Thanks so much Alex

try this https://shop.ultamation.com/index.php/product/85-dmx-controller. I've heard good things ? -- Ben Clay <http://www.autm8.com.au> Ben Clay ben@... 0408 299 796 www.autm8.com.au

Use a CueServer. Caleb Radecky | Manager, Online Products & Services Crestron Silver Certified Programmer | DMC-D-4K | DMC-E-4K ControlWorks Consulting, LLC | Crestron Services Provider | 8228

I have a situation when my customer wants to use his lighting console to control his house lights that are already controlled by rs232 via the pro3. If i were able to receive DMX i think its

This explanation is exactly what I would say I am experiencing. It seems like all the empty space allocated to the string is being printed with the string.

Matt- I ended up just hard coding these text strings with an MSEND. I don't think the users even knew they were editable before anyway. That might be the easiest option in your room too. -- Josh Winn

I was on a hardware processor (RMC4, I think) when I saw the same issue. My guess was firmware, since I'm told the module worked fine before. It was reading strings from NVRAM (not a file). There was

This is good to know. I ran into this issue and had to scramble and rewrite the library into simpl+ a few weeks ago. Sadly this is Crestron being Crestron. Cheers Natalie

Yup, started a case with Crestron to report it. I've wasted like four hours on this because it gets updated silently. I can't believe they make such rookie mistakes releasing software.

Same problem here, but no solution so far. Latest versions and VS2019 Update : going back to Crestron Lib version 2.19.76 solved it Best regards Chris