开云体育

Hi All, For those who've integrated with QSX so far, have you found any methodologies to create a faster, more efficient CopyPaste/SearchReplace process? With the issues that I've just found with QSX

Answering my own question...in a word...YES...:( And not in a good way, IMO...

Thanks Nico!? System is big (32 rooms) but not that big...

Yeah, EX-Link is likely how we'll go? - hoping you're right and that it will work well and KEEP WORKING!...Haha So do you mean that the ART MODE command is like an input - i.e. the TV stays ON to

Nice! Our issue is when (using IR) the room has been turned off (Art Mode),? the unit goes to the art, but when the client uses the all house off, that room gets another power off trigger, which

I have been using exlink. It works well. You will need to take it out of at mode when powering it in though. An input command works

I provide a setup page to "toggle" between art mode or actual power off when the TV is turned off. All it does is fire either the regular power off command (Art mode) or I send the power off command

Yeah, I just got off the phone with Samsung CI support and they confirmed that there's no discrete Art mode command...:(? ?Lame-O We're going to try EX-Link, which has discrete commands, though I've

Not confident to say there isnt one, I just know this is what I have always done.

Thanks, Matt, but no discretes?? I could accommodate this, but to have to P+H the OFF seems dumb... I'm looking for a discrete ART mode and OFF (completely off)

If you hold the regular off button from the UN series it will power off the frame

Hi All, Can someone post the Discrete OFF code for the Samsung Frame (and any other relevant codes...) It seems that with ol' standby the UN-Series Code set in the CresDB, the OFF code works as a

Yes... Not every one. Depends on how long between loads / Debugger stops.. I find Erasing the current program then sending it has the highest success rate.

I am having some weird issue with nonvolatile strings using VC4. When I recall the strings from memory, it has multiple \x00 added to the end of the string. I am using the standard way to save/recall

Correct. That's expected behavior for all DMPS3 models. If Prog0 detects that Program Slot 1 is empty on bootup, it will automatically install AVF to Prog1. If you don't plan to use AVF, you should

Agreed!? I'm shocked that it worked at all...

It was my understanding you ALWAYS have to have the Sonos System module in the program for anything Sonos to even work. And it has to be placed above the individual Sonos Device Module(s)

Hi My experience with Tridonic Msensor 2 is that, I programmed all ballasts, groups and scenes using the Tridonic USB/DALI interface (piece of hardware) and the Tridonic Master Configurator software.

Just a note for anyone searching for answers in the future. It turns out that the Sonos Device Module is not enough. After talking to Crestron I needed to add a Sonos System Module as well, and let it

Probably a basic question, but I'm struggling here.? I'm admittedly pretty new to js, but have worked in html and css (years ago)? I'm trying to learn my way through CH5 using the template project