开云体育

Yes... Not every one. Depends on how long between loads / Debugger stops.. I find Erasing the current program then sending it has the highest success rate.

I am having some weird issue with nonvolatile strings using VC4. When I recall the strings from memory, it has multiple \x00 added to the end of the string. I am using the standard way to save/recall

Correct. That's expected behavior for all DMPS3 models. If Prog0 detects that Program Slot 1 is empty on bootup, it will automatically install AVF to Prog1. If you don't plan to use AVF, you should

Agreed!? I'm shocked that it worked at all...

It was my understanding you ALWAYS have to have the Sonos System module in the program for anything Sonos to even work. And it has to be placed above the individual Sonos Device Module(s)

Hi My experience with Tridonic Msensor 2 is that, I programmed all ballasts, groups and scenes using the Tridonic USB/DALI interface (piece of hardware) and the Tridonic Master Configurator software.

Just a note for anyone searching for answers in the future. It turns out that the Sonos Device Module is not enough. After talking to Crestron I needed to add a Sonos System Module as well, and let it

Probably a basic question, but I'm struggling here.? I'm admittedly pretty new to js, but have worked in html and css (years ago)? I'm trying to learn my way through CH5 using the template project

I don't vtpro development will continue much longer.

I have done it, what's your issue?

Great thanks.? the current codes I have for Sky Q and HD do not work unfortunately.

So what I've noticed is that, if I stop all programs (progstop), then go to the app01 directory and erase all files, then also do a program unregister (progreg -p:1 -u), then reboot.. the DMPS will

Oh yeah!!!...:(? ? ? this has become a major issue. Long wait to start the session, and it crashes (often unknowingly) after 10-20 min. The only thing that I've found that somewhat helps is to not

Has anyone interfaced with a Toner Cable DCST-5X Digital QAM Set top Box using IR? Looking for an IR Driver. DCST-5X Digital QAM Settop Box - Toner Cable (

I'm also noticing painfully long periods starting debug sessions whereby I see the Please wait... Gathering Device Information dialog

You could also connect using a USB cable and issue "acquire start" on the remote. This does a few things for you. It powers the remote so you aren't concerned about dead or week batteries. You know

Also... it isn't the home button, its the Menu (|||) button.

My general rule is to hold about 5 sec (right after it blinks back at you). When that doesn't take, the next time I hold for over 20s (the rule is 12 - but I take it further) that tends to usually

If it is a big lutron system, it will send big and constant amount of data to crestron if not disconnected. Maybe you can use the connect signal only when needed on user interfaces or logic. That is

Hi All, I'm doing my first QSX integration this week. The Command Processor Module has both Connect and a Disconnect *Pulsed* inputs. Of course the 'Connect' would be pulsed around the start of the