开云体育

No. It does not help. Soon I will be able to check the command associated with the router on the processor. And yet I don’t understand why such services as conditional Telnet, an internal Web

Is it possible this is only an issue on 2-series processor? I have several 3 series, which I have not seen the issue with using Crestron DB driver (I think v4) but I have 1 2-series that is having

Has anyone controlled a Samsung WA65C display using it's RS232 port? We have several coming up on a project and the user manual just says "Serial Interface for debug only." I was wondering if it will

Just a thought, if the "Enable" signal of the TCP-IP Server is set high with a delay to make sure the router has time to initialize. that should fix the problem as well, no?

Exactly. If the server is initialized before the processor pulls an IP address, DNS etc. it will fail, plain and simple. Do what the others have suggested and I'm 99.9% certain it will fix your issue.

Did you try just entering in E instead of 0E?

weird D-30 gives error with IP-ID 0E but accepts IP-ID 20--seem to remember some mention of this or similar

But you are technically using the CS, it is being used by the processor. As Lincoln indicated earlier, the processor sits behind the router along with anything you may have on the control subnet (much

I did this recently Player names must be exactly the same Order of the module matters (init needs to be above all others, followed by device modules) Remove all characters that are not A-Z,a-z it

So you tried it and it made no difference at all? wrote:

Thanks for your reply. But in our case, the Control Subnet port on the CP4N processor is not used at all! All equipment is located on the LAN port.

Im getting feedback that Analogway Eikos 4k are having supply chain issues, And I have project in need of one any recommendations for alternates on anyone not having supply issues this year?

Good morning Dave, Tony, I updated the firmware to 1.8001.5061.29979 but the problem persists. After the update-reboot sequence some notices started showing up in the error log about SSL Certificates.

STARTPROGAFTERROUTER ON should fix this for you. Under the hood there are two different components – the processor and the router. The processor sits behind the router along with anything you may

Hi Michael! We purchased Josh's module and have it working great for controlling the ICMP (had to downgrade from a 4 series to 3 series to make it work but that's OK - it's a known issue with later 4

a little not what I wanted, but you gave useful advice. Thank you.

It's so long phrase. I use Alexa Routines. For example, phrase (routine) "Alexa, hello!" start macros with voice greeting and execute some long command/commands.

It will look something like this: #Define_Constant MaxElements 20 Digital_Input Test String Array1[MaxElements][8], Array2[MaxElements][8]; Integer Array3[130]; Push Test { Integer i; SetArray(Array3,

Yes, I only need the numbers of matching elements of the arrays from which to build array3

Are you just trying to see if each element of array1 and arra2 equal each other? If they don't converter them to integers, using array1 as the element and array2 as the value for array3?