开云体育

Hi! The TCP/IP Server symbol (port 888) does not work on the processor CP4N after a hard reset or power cycle. But it works when the program is restarted.?A program consisting of only this one symbol

Thank you!

Thanks Jeremy. The issue is a known problem in the LwIP driver used by the device manufacturer.?? That being said, since I have no control over fixing the device, I was hoping for a way to force the

Agreed. A FW update is likely needed for compatibility, based on timeframes shown in release notes. 3-Series FW v1.503 is from 2018, while Voice Control v2.x modules are from Mar.2021.

This is not HTTP Chunked Transfer Encoding, this is a problem with the device expecting the entire request to appear in the first packet received. This is never a safe assumption with TCP connections

Yes, it's a known issue with only v4.25 that was reported to the SIMPL team shortly after that build's release. Suspect related to the new CTRL+Enter feature that allows for adding multiple instances

Igor, thanks for valuable information. The embarrassing thing here is that I am replacing Control 4 with Crestron, just for this theater setup, because I can use a module for displaying and

Tony, I have only had this happen once. That one time it renamed all the inputs and the first half of the outputs on a module. I just figured I had a spelling error on those outputs.

Well, technically, you could STILL be going crazy... :-) Actually that problem has been around for at least a few months, and I think it's even been discussed in the Group. While we're talking strange

The original D3Pro program was worked on and compiled Monday 10/02/2023....four days ago. I did a Master Installer yesterday.. I now think I'm getting somewhere after rolling back the Device Database

I'm not currently connected to anything though.? I simply opened, on my laptop,? the D3Pro project I worked on Monday, without issue, and chose "Save As", with a new version number ("Smith Lighting

How "old" is the original D3Pro program - i.e., when was it last saved or compiled? What versions of D3Pro, Crestron Database, and Device Database are you compiling with? What's the model number and

Each and every “connected device” must have a unique Crestnet and or IPID address. If the D3 Pro program is sufficiently old, it may require firmware updates To one or more …or even all devices.

"Unique network address? ":? I don't understand the question. I simply chose to rebuild the existing D3Pro project after a "Save As" with new version number. Then opened the original D3Pro program,

Unique network address? Best regards, Michael S. Moran <https://ci3.googleusercontent.com/mail-sig/AIorK4y1ilEyjJttnBCXsRVGoMagDS7JI47hg0Y3H2_F_4ncaj_DPmMcem4AM8rVGtrajdeLQH8XvXM> Office: 561.391.1843

Five hours so far to add a Horizon in-wall dimmer, and no end in sight. D3Pro gives the following during Build:?Program Generated Incomplete Any insight?? I can't even see straight due to pure

Hello Tony, I guess not. I'm usually cautious of updating firmware in an otherwise working environment (the only aspect not working on the system is the voice control) but I guess this is a valid

The FIRST thing I'd do, is update that firmware to the current version. Is there some reason that can't be done?

Hi Dave, Thanks a lot for the response. I actually have checked all things related to the processor and internet access. The client is using a DIN-AP3 processor (using firmware 1.503.3568.25373), no

I thought they had fixed this a while ago but I just tried too and alas it is still broken. Well at least we have OS4!!!!! ugh