开云体育

For ceiling mics, you will really struggle to beat the Shure MXA series.? They are Dante so will work with QSC or even the biamp. The sennheiser Team Connect 2 ceiling mics are pretty good too.? I

Can anybody tell me what the Scenes (LightScenes) are in the Voice Control Room Lights module? I it seems like it's an old feature of Alexa, and since I've never used it until now, it seems like I

Select still working well via CEC control on iOS 17

Good to know, AVmaster and Alex. I don't think that I want to go down this route with client systems, though, as it seems like it could create potential confusion for servicing down the road. Of

Check this https://docs.crestron.com/en-us/8525/Content/CP4R/Design/System-Design-Control-Processor.htm NFH

Excellent, thanks BamBam! What would you use for ceiling and/or table mics? does QSC have these as well? or would you direct to a different brand? I do mostly hi-end Resi so my vendor experience in

Maximum System Size differs. https://docs.crestron.com/en-us/8525/Content/CP4R/Design/System-Design-Max-System-Size.htm

I realized when I went to test this weekend that I learned an old Toshiba DVD player driver (because it's a rare code set) to all my Apple TV's so I did not have the reported issue at all after

the "x" om the 8x is the cameras ID So if camera is ID 1 = \x81

Aside from the obvious ports and form factor differences are there any differences in the actual capabilities of these two processors? If you're not using the ports and doing everything over IP is

Shure P300 is only really good for very small rooms.? It's more of a usb sound card with a little bit of processing rather than a full blown Dsp.? Good for a small conference space but I wouldn't

You can also power from a PWS75 externally as a stop-gap if you need ... don't ask how I know :-) Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Sunday, October

You can go to Amazon, get a nice MeanWell 240w 24VDC DIN power supply and power the unit via the Crestnet port. ?If the card cage is empty it will tuck right inside that space. ?If you want to get

Something I’ve been doing for years with AppleTV is to just use a generic Sony BluRay for my IR codes then going into the AppleTV settings, remotes and devices then learn remote. ?You than then

I already found this Crestron module on Upwork and it is working great.

the pro3 power supply is an off the shelf part MINT1180A2475K01.? You can buy online: https://us.rs-online.com/product/sl-power-ault-condor-/mint1180a2475k01/70151979/ Pro2 if needed:?Astec

You can power it off of the Cresnet port. Be aware that the processor with cards can require more than 75w.

Interesting, I had a project recently that used an 8x8 that we updated to the latest FW. We had an LG TV. I started out using the LX series driver from the CresDB, which I've used a number of times

FYI, I believe that you can power the P2+3 by feeding power into the Cresnet connector...I'm going off very old memory...

Well, I didn't have THAT issue... However, Earlier this week we added a new ATV to an older DM32x32 system. When sending IR out of the Endpoint, it was sending commands for about 2 sec. I really