开云体育

Connect via SSH and update Crestron environment.? Should take care of the cockpit login issue. Initial SSH credentials are either admin/ no pass or admin/admin, or crestron/no pass. Then it will ask

So I take it that Crestron are aware of this and continue to ship units with this issue. It would also help if the instructions included all this additional information instead of having to resort to

For first time setup with this "Browser too old" error we have been hooking the VC-4-PC-3 up to a monitor and using a keyboard and mouse to setup initial username/password Then you can force the Linux

I haven’t deployed it in such a fashion [partially because I like to keep my desktop and laptop tools/workflow closely aligned] but something like a Point of Sale keyboard could be useful if you

I never considered a mouse with macros. I'm going to check that out, thanks for the suggestion.

I'm on my cell but search TrueBlue for the VC-4. There's a console command you need to send.

depending on which stream your looking for rtsp://Username:Password@IPAddress:554/?chID=1&streamType=main or rtsp://Username:Password@IPAddress:554/?chID=1&streamType=sub

Also tried to ring Crestron EU support and the office is closed for holidays and there is no longer a tech support direct line. Online chat on crestron.com is not working. Are Crestron deliberately

I've just taken delivery of 2 VC-4-PC-3's. I'm following this guide: VC-4-PC-3 Setup | Crestron Virtual Control Server Software Manual (

Haven't used one before but is it behind a username/password that needs to be entered in to the url?

I use a macro on my Razer gaming mouse to make the F9 process faster. I would recommend doing something like. My macro assumes you are incrementing numerically and hits F9 and does all the tab, enter,

Yup, just suffered this all afternoon with tweeks to a lighting interface program...:) It is definitely not all folders, but as Tony said, it must be something about the logic in certain

Thanks. I agree it's definitely not something worth running up the chain but would be nice to figure out.

I don't know of a fix, but I have also noticed the problem. However, it doesn't always happen, and seems related to what type of logic or modules the folders contain. It would be nice to have a fix,

I should add, this is only for folders. When doing this on singular symbols I don't have this problem.

I do a lot of F9 (search and replace) in my SIMPL programs and was wondering if there's some setting or something I'm overlooking to make F9 operations easier. It's been this way for a long while but

is the rtsp url the same as the older NVRs or has it changed? i'm trying to get it to show in VLC and its not working. i've verified the port is 554. it appears to connect but then says it can't open

Thanks, MSTC! good points... It seems interesting to me that the ZA would work to replace the older units, but the AZ wouldn't, when the AZ would replace the ZA?!?! Also, in checking with Sony CIS

that is my last option, hopefully gets solved on a better "feedback" way. I will let you know and share results thanks nf [email protected]>) escribió:

thanks Eric, I will take a dive in that. I will share my results. nf El sáb, 12 ago 2023 a las 7:03, Eric Luckart (<eluckart@...>) escribió: