开云体育

Austin TX

We have worked with many different panels over the years, and the general findings vary greatly on functionality, particularly on the sector the alarm panel has been created/intended from (ie bank

ah, I see. I need to set Shelly I/O URL Actions. All set.

Jay @jbasen , I'm running v23.1 (Dimmer v6) with a Shelly Wall Dimmer and I receive no feedback from button presses (nor local brightness which I think I understand is a limitation of Shelly). I've

I've been battling this issue intermittently with a site for the last few months also... After a CP3 reboot, things are stable for some period of time (sometimes for months), then the system will

Thanks, that's the one I was looking for. I now remember using it some years back and just forgot. Years back when I was only programming Crestron, I always said that knowing all the "tools" you have

I actually did this yesterday and it created a ton of SIMPL programming. I know I can strip it down to only what I need, but wow!

I was just hoping they had. I have a client that had an advent system that died. The security guy replaced it with 2 Elk systems. One for security the other for environmental. I get complaints every

Where is it located? NFH

I don't believe the Elk modules have changed in many years.? So, they don't support full keypad emulation.? That being said, I have always found that they support the basic functions a homeowner

I removed a unit from a resi project.? It works. If anyone can use it - make me a reasonable offer and I'll send it your way...

Jay, Has the Elk protocol ever been expanded for keypad emulation?

I’ve always liked the Elk alarm panels. Very good integration and the protocol documentation is available from Elk. So, if the integration modules don’t include a feature you need you can add it

My default go-to is the Honeywell Vista 128BTP. I don't know if there's integration with Alarm.com (except for monitoring)... I'm sure others will have add'l suggestions

Well that sucks! So what alarm brand is everyone using that is compatible with alarm.com and Simpl programable? This house was not wired for alarm keypads and the homeowner was promised that he could

Of the top of my head I would probably use the press hold module, a toggle, 2 and's and a ramp. The hold would trigger the toggle and the 2 and's. One output of the toggle would go to one and, and the

I have done this a long time ago, I don't remember the exact logic I used. But I do know that I created a D3 project that was just one light and one press, compiled and opened the Simpl and reversed

Take a look at the Crestron Module: press and hold v1.2 (cm) It will give you a separate 'Not Held' and 'Held' outputs that you can take separately from your button press to your toggle logic and

Hi, I have a new request from a old project to add Toggle Dim to some of the keypad buttons. This project was completed some years ago and we programmed the buttons to only Toggle the light(s) on/off

You might start with reviewing this previous thread...Unless things have changed recently, you may continue to be disappointed... /g/crestron/topic/94194951#249715