开云体育

First compile of any project will be slow in Construct while it sets up the build environment. Second compile should be much snappier. [email protected]> wrote:

Hi Charlie It’s all to do with the way the BBC provide their content. They are shifting it all to their BBC Sounds ‘app’ which NAX can’t handle yet. I’m not sure the ‘turn off’ date was

Thanks Justyn, Im assuming this is something to do with whomever is providing the streaming database to crestron so possibly not a crestron issue.......... so just means it won't get fixed anytime

Hi Charlie I can confirm the same on one of our sites too. I think every one of us in the UK need to raise this immediately as it needs sorting, otherwise Crestron will be getting an awful lot of NAXs

Hi All, Our jobs with NAX units appear to have lost the ability to stream any of the BBC radio channels. We got the "Oops there's been a problem" popup so we deleted the favourites and now the BBC

Enable debugging on the module, and let it tell you what the error is. These modules are very sensitive so if an electrician was doing something while the module was powered up then it's probably

If you look at the installation guide, it says the 1-2 error code means "Communications to the corresponding dimming processor have failed. Reboot the unit or contact Crestron customer service.." So

One license per processor.

Would we have to pay multiple licenses then? or just a single license (per processor).

The 16 devices is per room/tile. Multiple instances of the driver can be installed, with up to 16 devices per instance.

Gateway Backup/Restore functions are still available in Toolbox. You need to connect to the gateway first (in Text Console, System Info, etc.), and then access it from the Functions menu. (It isn't

That seems somewhat interesting, thanks @brewernv. They mention a limitation for 16 devices only, is that per room/tile? or in total?

Reseated all cards in DM frame PJ RMC rcvr still not functioning Used stand-alone POE injector – PJ RMC rcvr OK Moved POE back to POE switch – still OK Had to use my POE injector to get all

There is an available Crestron Home Extension driver that supports Shelly lighting devices and provides a UI similar to the one provided by the native CH lighting support. The driver also makes

"Works With Nest" Transitioning to "Google Nest" (crestron.com) ( https://support.crestron.com/app/answers/detail/a_id/1000381/~/works-with-nest-transitioning-to-google-nest )

the client tried a POE injector at the DM, not the room box, still didn't work i have some P/S but they all have connectors, the RMC-4K-100-C-1G has a phoenix connector client has tried new cat5,

I wouldn't recommend this for a client but if it was my home...... Use a Lutron RA2 main repeater and create a bunch of phantom (fake) loads that correspond to your Shelly devices. Then use SIMPL to

Hello guys, I'm currently experiencing an issue with a CLX-2DIMU8 lighting module. This module was installed Thursday of last week (with no issues) and just yesterday it started flashing a 1-2 error

That's a real shame. Is there a workaround or trick or something along those lines that would facilitate the use of these devices in the Home UI? instead of navigating to each tile for each device.

Yea I tried importing one of our templates which is very graphics heavy and it completely destroyed it. Half of the objects didnt come thru or arent supported yet. We are far away from being able to