开云体育

Hi All Does anyone know what the OHM rating on CHV-RSS Slab Probe Is All Help is greatly appreciated Regards Mitchell Chapman

Bruce you're a life saver, thanks so much. Hopefully can return the advice one day. Cheers! Joe

The current generation of Samsung Frames can be reliably controlled using CEC, but your CEC source needs to be "unregistered". I suggest using the following: Power on - \xF0\x04 Power off - \xF0\x36

Thanks Phil, Afraid that's what we've tried along with everything else, have tried broadcast addresses and different source addresses to no avail. Doesn't help that it seems like control via CEC is

Well, perfect timing...:( New 3-series FW: Resolved Bugs: * Resolved an issue where firmware upgrades would fail intermittently.

I don't see any object references in that code, so it would be something in CalculateX or CalculateY. If you can catch the exception in ButtonPress you can print the full stack trace to console, or

Just an FYI... I had another site with a CP3 and a CP3N, both with the v1.8001.4666.x FW. Both DID NOT update as 'expected' to the .5061 version. INITIALIZE-RESTORE-BETACLEANUP worked on the CP3, but

IIRC on these you first have to select HDMI 1 and then power off.

Morning all, Just about pulling what is left of my hair out trying to deal with CEC control of a Samsung Frame... \x40\x04 works fine for on and I can select HDMI inputs fine but when it comes to

This is quite easy and we have done it several times, although probably not in the last 5 years. We used a company Synapsys who supply and configure another Trend module that adds to the Trend system.

I just started playing with this TStat and the TSTAT Config Tool in toolbox... Do others have issues with being able to connect to a stat? I open the tool, retrieve a TStat's config, make a change,

For public variables I usually create methods for SIMPL+ to use for setting and getting. for class objects as long as you are aware that SIMPL+ requires the class to have a parameterless constructor.

What are some best practices to instantiate objects between Simpl# and Simpl+. Public string MyMessage; public event EventHandler<MyEventArgs> MyEventToCall; readonly RootButtons[] _buttons = new

Thanks for your input @ckangis, that is great info! @johnmax, my goodness that is a PITA.? Wow.? Just wow.? That is pretty clever and I may actually utilize that, but wow talk about some backwards

Just an FYI... There's an extender in SMW for the TSW-x70 panels called Button toolbar. It allows you to show/hide the toolbar and turn each of the 5 buttons on or off. It also allows you to place the

We discovered the same issue with the virtual toolbar. It is a poor replacement for panel mounted hard buttons. Especially when the real estate is still there for them- its not like theres no bezel...

Hi All, Kindly I need more information about the integration between Trend Control IQ4E (Honeywell) and Crestron system (Pro3). is there a way to communicate between these 2 systems and how, if

Hi Anyone have a IR driver for the Kartina Like TV-203 (Dune TV-203)? IR TV-102 not work...

If security is a factor, IIRC – and I haven’t played with it in a LONG time – the Crestron voice recognition was also cloud-dependent… So perhaps the first question is _why_ the network

+1 for hating the virtual 'Hard Buttons'... As you may know, SMW gives you pretty good control of the VHB window, and *I Think* that there's a way to have the program know that the (Sonos) app is