开云体育

I just mocked this up with no issue.? You probably can't forward 443, nor should you.? Pick a random port and setup your router to forward that to 443.? Also forward 49300, as you have already.?

Yes. You can run it over WiFi. Call TB and they will help you. Files were circulating either here, or in the facebook group.

Hi guys, I have project where the touch screen is the wireless tst902 and the processor is an RMC4.Am aware that we have to have a crestron ER gateway so as to use the touch screen with this

Maybe mentioned before, but what about a recompile/upload after upgrade.

I found the command to read current routes,?DUMPDMROUTEINFO.? The output is not easy to parse but it can be done.

I'm building a remote control module to make routes on a DM using Stream Deck / Companion. https://github.com/bitfocus/companion-module-crestron-digitalmatrix/blob/main/HELP.md I'm using telnet

I am trying to figure out what type of port forwarding I need to do on the network to make Simpl Debugger work with VC-4. This is not a question on how to use SIMPL Debugger with VC-4 on a local

Turns out the device was just used by Legrand, http://67.205.146.177/books/ rs-232-dmx-engine/chapter/ command-syntax ( http://67.205.146.177/books/rs-232-dmx-engine/chapter/command-syntax ) They have

You only need the filename when there's more than one puf file in the directory.

If you see the same black cat cross your path twice in a row, it's a glitch in the Matrix, and a pretty good sign you're running in virtual. Sorry.. there's a GetModelNumber() function in SIMPL+ that

https://www.enttec.com/product/din/ethernet-to-dmx-rdm-adapter/ I have used this product to directly convert sACN to dmx for control of simple dmx fixtures LED color changing soffits etc.--if it's

Interesting, Alex!... I'll try this. Though when I do an update, I always use 'puf cp3_1.8001.0214.puf all' command, which I *Assumed* was the same. I'll try it tonite an update the post... Also FYI,

I just updated an AP3 to 1.8x yesterday. This unit was previously on 1.504 which was our "go-to" stable version before some of the certificates went out of date. I always use "puf all" when I update

Has anyone controlled DMX from Crestron using this piece?? I have 4 DMX lighting fixtures I want to give controls for on a touch panel, namely brightness and color temperature.? I am reaching out to

Is there a console command for changing a CRESNET device Serial Number? Thanks.

Its been a while since i've used the Horizon HZ-KPEX or HZ-KPCN, but if you have issues with the keypads flashing, here are my notes on what the different flash codes are: Turns on for 5 seconds = The

I may be having an old man moment but is there a way to evaluate at runtime whether the program is running on a physical processor vs a VC-4 outside of Simpl# Pro?

Never had an issue with either 3Series or 4 Series.? I can send you a screenshot of a D3 with MC3 if you want.

Has anyone experienced horizon keypads not working with MC3 or MC4 processors? I've a project with bunch of horizon KPs working great with D3PRO and AV2. When changing to MC3 or MC4, the keypads just

Right, thank you!