开云体育

Hi I have just tried making an image from on of mTSWy 760’s to repair another panel of mine l that has failed, assuming it is the SD card. ?On trying to make an image from the SD card I am getting

Folks - I am trying to allow a Touch Panel user to select single or several messages based on help desk issues they are experiencing, then send that to Fusion/email. I am having issues building

FYI for everyone here. Crestron's response. Answer ID - 1001829 Pretty much what Marc said.

The following files and folders have been uploaded to the Files area of the [email protected] group. * /ESI-Draper Intelliflex Docs.zip (

Upon further checking the Draper Intelliflex documentation may be what you are looking for. The interface pictures that you sent the link to is the ESI (Draper) SC1. These in fact use a local control

I believe so. After working with Sony yesterday, I can turn the projector on, but not off. Nor can I change inputs. However, I get 'ok' and proper responses for input and power state queries. I will

I believe that those interfaces were made by ESI and used by both Draper Shade as well as Somfy. These can be controlled via RS-232 using either an RS232 port or using one of the IR ports set as a

Hi, Can you upload the IR driver that partially works to the files section of this forum? Maybe we can investigate and create additional commands Best regards Crestronfreak55

Somfy's tech support should be able to confirm whether or not they're actually Somfy parts. If so, they should also be able to provide or help find the correct driver.

The only IR drivers I've found anywhere (Crestron DB, RemoteCentral, GlobalCache) are the same 3 drivers and none of these control the shades I'm dealing with. It's possible the shades or the IR

Thanks Marc, I am headed back to my customer's office to give it another try.

So far we've been having success with the latest guidance of turning off Zoom Room Page Flip, letting the panel cycle through a reboot, verifying Zoom 5.13.0 gets installed via the Status page, then

i need one too

You should just be able to do a search and replace

Have you tried the code set in the Control Tower database at irdb.globalcache.com?

I haven’t checked, but are the codes on remotecentral.com? Also inside the control box, are there no CCI’s you could play with?

Yes, we've tried learning codes from the existing program but there are some problems with that idea : 1) Each shade is controlled by a single button which *seems* to send out some sequence of open,

The feature is not yet exposed in construct ... work around until it is... Smart Graphics: Advanced Web XPanel Configurations (crestron.com) ( https://support.crestron.com/app/answers/detail/a_id/5793

why not put an ir learner on the current system and move it over that way.

So now they want to fleece us for products they can't supply.