开云体育

Does anyone know or found any TCP/IP commands that can be sent to Crestron end points TX-201, RMCs and scalers to send IR, RS232 and CEC commands to connected equipment eg LCD Screens and Projectors

You have to extract informations from strings you receive from the cisco It's not very hard, just need patience :)

I read through and looked through the links carefully, there's nothing I could not understand. Control of third party products is often achieved by using/creating User Modules or Crestron Certified

I have the same issues with a CP4, and i think it become when there are a lot disconnected TCP connection... You have to initialize the processor when there is a crash... For the panels, the last

The "something obvious" you missed was in the previously-posted link - <https://support.crestron.com/app/answers/detail/a_id/1000527>. This one might also be useful

Or am I missing something obvious like I don't know how to install the downloaded .pkg file? I have searched through everywhere but there's no instruction or methods to install a .pkg file. Anyone has

I did what you have said, it shows the DSC drivers, yet the content of the zip file, like I've said, does not contain any drivers nor module. It just had some senseless files in the package:

Does a DNS A record exist for ‘MC4-00107FE73CAB’ in one of the DNS search domains (either a record you manually created or, if your network is configured to allow this one automatically

I use the F7 key a lot for bringing up the file transfer dialog when connected to a processor with the terminal tool. No longer seems to work in v3.12.2. Any way to get this back or is this just a

The link URL details gets fouled up if you're not already logged in. Log in to the IO site then paste the link in the address bar, enter, and you should get it...

I tested on my 6050UB and 12v trigger turned off right after the lens cover fully closed. Hopefully that helps since they are mostly the same PJ.

I would also not rely on a ping for verification of a present device. There are environments that block pings, but only allow very specific service ports. Cheers, Thorsten Von: [email protected]

Did you add a DNS entry in your client's hosts file? This shows how on several different OSes. https://www.liquidweb.com/kb/dns-hosts-file/ Also consider that if you are going to be creating a

https://support.crestron.com/app/answers/detail/a_id/1000527 ( https://support.crestron.com/app/answers/detail/a_id/1000527 ) Use the DSC driver linked above with "Crestron Certified Drivers Security

Hello, I am writing a TCP client class in VS2019 using System.Net.Sockets TCPClient. I created a test server on the MC4 at TCP port 9001. The MC4 IP is 10.0.0.57 and the MC4 hostname

I'm assuming you mean you're programming a 4-Series control system in SIMPL. https://drivers.crestron.io/rad/driver-search/4341 https://drivers-api.crestron.io/help/driver/4341

Anyone has any updates on the release of the drivers to work with Crestron? if we don’t have a driver, would it still be possible to programme our system? Anyone has some samples to share? I really

Thanks everyone. I swapped in CNPWS-75 power supply and the AP4 works fine, thus the DIN-PWS60 is fried. Sign, unreliable equipment.

This issue was identified back in late August and being tracked under *BR 7307*. If you have a support case it can be added to BR 7307 for tracking and follow-up. I've also added this groups.io thread

I have a few of PTX-3 and MTX-3 that apparently hang during boot up. ?They light up, then go dark, then light back up with splash screen and there is no further progress. ?The MTX-3 shows the