开云体育

Does a DNS A record exist for ‘MC4-00107FE73CAB’ in one of the DNS search domains (either a record you manually created or, if your network is configured to allow this one automatically

I use the F7 key a lot for bringing up the file transfer dialog when connected to a processor with the terminal tool. No longer seems to work in v3.12.2. Any way to get this back or is this just a

The link URL details gets fouled up if you're not already logged in. Log in to the IO site then paste the link in the address bar, enter, and you should get it...

I tested on my 6050UB and 12v trigger turned off right after the lens cover fully closed. Hopefully that helps since they are mostly the same PJ.

I would also not rely on a ping for verification of a present device. There are environments that block pings, but only allow very specific service ports. Cheers, Thorsten Von: [email protected]

Did you add a DNS entry in your client's hosts file? This shows how on several different OSes. https://www.liquidweb.com/kb/dns-hosts-file/ Also consider that if you are going to be creating a

https://support.crestron.com/app/answers/detail/a_id/1000527 ( https://support.crestron.com/app/answers/detail/a_id/1000527 ) Use the DSC driver linked above with "Crestron Certified Drivers Security

Hello, I am writing a TCP client class in VS2019 using System.Net.Sockets TCPClient. I created a test server on the MC4 at TCP port 9001. The MC4 IP is 10.0.0.57 and the MC4 hostname

I'm assuming you mean you're programming a 4-Series control system in SIMPL. https://drivers.crestron.io/rad/driver-search/4341 https://drivers-api.crestron.io/help/driver/4341

Anyone has any updates on the release of the drivers to work with Crestron? if we don’t have a driver, would it still be possible to programme our system? Anyone has some samples to share? I really

Thanks everyone. I swapped in CNPWS-75 power supply and the AP4 works fine, thus the DIN-PWS60 is fried. Sign, unreliable equipment.

This issue was identified back in late August and being tracked under *BR 7307*. If you have a support case it can be added to BR 7307 for tracking and follow-up. I've also added this groups.io thread

I have a few of PTX-3 and MTX-3 that apparently hang during boot up. ?They light up, then go dark, then light back up with splash screen and there is no further progress. ?The MTX-3 shows the

Also the AP4 can be powered via POE, allowing you to test if it boots up by itself...

Do you have anything connected to the cresnet ports on the ap4? could it be a short circuit on the 24v wiring?

While I haven't had any DIN-PWS60 failures yet, I have seen a lot of other Crestron power supply fail.? In many cases the power LED on either the power supply or the end devices lights up yet the end

I'm not sure if I have a spoiled DIN-PWS60. When it's not hooked up to other DIN equipment, it has a GREEN light. When it's hooked up to DIN-AP4, the Power button on DIN-AP4 is blinking in amber

Previous versions of Toolbox had the "Clear ID" option not greyed out, I don't know why Crestron greyed it out a few versions ago, I rolled back my Toolbox to version 3.03.252.00 on a 2nd laptop I had

yes i think also this is a bug of the latest version of the toolbox, maybe it's better to use the previous version first if it works fine

Hi Stujrob i have the same problem, after I ask crestron support, do change the ID one by one device the result was successful?but it takes a lot of time