开云体育

Ha, yes Chris well pointed out. This bit me when I fitted a second biPad to my home system also running off a 75w psu. Had me scratching the bald bonce for a while. I love biPad/Pad8's - oh how I miss

Good news! Glad you solved it... Just an FYI since we all are using things like Pad8's alot more than we thought we would...:) The Pad8A/BiPad8 units draw 10 and 20 watts/Cresnet respectively, but

Systems with remote access are typically the ones that require AUTH+SSL most. Less of a concern if the user's mobile device is utilizing a secure VPN to their network, but when the system was set up

Early versions of the CNX-PAD8A firmware had an issue with losing their firmware.? The net result was the unit was dead except maybe for the power or NET LED (I don't remember which).? Newer

Keep an eye out for our 1G updates we are revealing at CEDIA next week, you'll like some of the new updates!

It was the PAD8A. I suddenly remembered that it is supposed to flash all the rooms leds at power up and it was no longer doing that, just solid power & net even when directly hooked up to the PSU. I

+1 for the AprilAire stats. ?Wifi is needlessly weird to setup but they are very solid once in service. ?There is even a Home module for the 3 guys that got their Home processors in the last 2 years

For what it’s worth you may also want to focus on that 75w power supply. ?I distinctly remember back in the day that those had a very definite lifespan. ?As they got older they somehow got

You’re ?right, it doesn’t help in any way… The system has 10 instances of Mobile. ?Two of which are used to access the system remotely from out of state.

I know this doesn’t help in any way - but I’m curious as to why you have to have auth disabled in your install? Tim Greenbank Control Systems Engineer

So just to update, spent another few hours trying to get this working. ?Went all the back to a 1.5 FW then did a restore and init after turning off auth and ssl. ?Every attempt at updating will

I have a 2 x CP4-R that I can sell used. 1 used for my test bench and the other recently removed from a project regards Stuart Hodgson Zeale Group Pty Ltd ________________________________ Sent:

I have a CP4-N test unit, and an MC3 unopened box. Thank You, Michael Benignus

Though I'm sure that someone else will answer your actual question, its these kinds of things (Rigmarole) that have led me to just pro-actively authorize all processors now... Eventually I'd be forced

Your so right Tony (and Chris), I posted without any effort, and figured being lazy wasn't right, so I deleted my post and actually did a little foot work. I found that trane topic, and the notes.?

Ok, so the first thing I did to the new unit when received from eBay was to do an init/restore/betacleanup on it. ?It had a fairly newish FW that required AUTH. ?I immediately loaded a 1.5x FW and

Email me for a gateway. ?I have a CEN-GWEXER-PWE. ?Brand new in box.

I have this message on all DMPS3s since around 1-2 months, I just ignore it but I don't know why it's there. Everything seems to work fine anyways

I have never done it with a CP3N, but I know on NVX if you need to revert back to previous security requirement you load the previous firmware to the unit then perform a restore. If you just revert

Are these not the same as the Infinity Touch that have had the RS-232 modules on the App Market for years? https://applicationmarket.crestron.com/carrier-corporation-infinity-touch-control/ I did a