开云体育

I have heard different opinions on the practicality, but I prefer to actually have two panels, one Crestron, one MTR. The person holding the meeting can drive the call like they are used to, and an

Anyone ever take a SSC-102 type sign and extend it further into a space from a ceiling that is too high on a pole or similar? How did you go about doing so? I think the space we are in will have a

Thanks Andy for your answer, it is crystal clear for me now. Regards.

Never really been an issue, so never thought about it.? Have a half moon window with 5 shades in pockets.? The pockets are stair cased. _____ _____? ? ? ? ?_____ _____? ? ? ? ? ? ? ? ?

It won't have any integration with the unit, but you can definitely have it in a Crestron control system but you would need another panel / UI to run the teams interface. The Crestron Flex systems

If you don't get the crosspoint file generated in the program output directory, you can turn that setting on in Simpl Windows by going to Options->Preferences->Compiler Settings and checking "Generate

Microsoft Teams Room. The -T Flex models for Crestron’s specific units.

What's an MTR?

Crestron made a breaking change with the 5.1 update. The PIN field is now a string instead of an integer. They updated the 5.1 simpl module parameters to reflect this as well as the Simpl# library,

Is it possible to use a Crestron control system with a non Crestron MTR? Like Logi Tap or the like?

Also there are some modules that use crosspoints internally. Might be worth checking. When compiling your should automatically get a file with all informations about crosspoints in the program.

While I haven't confirm this will work for volume volume ramps, you might try using the SIMPL+ CreateRamp function.? It's mainly used to ramp lighting load.? CreateRamp uses Ramp Control Blocks

Use a function instead of a for loop. Create a function with a wait inside it. After the wait, call your function again. Use necessary logic before your wait.

I can’t speak to it yet, but I’m planning on testing a UC-CX100-T with a QSC Q-Sys Core Nano in the coming weeks. QSC rep indicated it should be possible but we didn’t get in to it too much as

Figured it out - the D200 doesn't seem happy unless I set all of my transmitters to D10/D20 compatibility. Apparently no Pixel Perfect for it. [email protected]> wrote:

First use of the D200 here (in the field, of course). Has anybody run into "incompatible signal type" messages with this combination?? The D200 is set to auto resolution and auto color space.? The

Yeah, that was the first thing I looked at - didn't appear to be the case, but I'm going to monitor and see if I can figure out WTF is happening. Thnaks, Mike

Thanks for the reply guys.? Very helpful. Samash,? I'll try that string when I get home. Out of curiosity, where did you find that info as the 2N doco I'm reading for the http trigger states this..

It’s crude, but you can use Delay(100) to halt for 1sec my S+ is a bit rusty though! ;)

Hi Bambam. I did this exact thing with a 2N IP Force intercom, controlling the onboard relay with HTTP triggers from the Crestron. I added Http Triggers called "latchon" and "latchoff" and programmed