开云体育

Got a simple project, where you select an NVX and preview it's image using the url https://nvx-ip/preview/preview_540px.jpeg on the touchpanel using dynamic image. It works. However, how do I remove

Were you using the control subnet of the PRO3?

I wish I knew about that Zoom Rooms one a while ago. I was able to launch regular Zoom but I never found the URL for Zoom Rooms, so switching from Crestron Go to Zoom Rooms was less seamless than it

NAX and NVX are essentially the same in the network guidelines for switch configurations. When they were initially released I was told to use the NVX documentation for switch config. There's a lot of

Working on a deployment with 100+ NVX devices on a single domain, NVX Director, Extreme Switches in star topology, and a Pro3. Had an issue where the processor was crashing after a reboot. Solved the

Intaglio is looking for an experienced systems programmer to join our team. See the job link below or reply to me directly (rather than the group).

Karl, I have one, lightly used.

Because even in the security world a lot of the overflow and command execution examples called calc as it was harmless to demonstrate. Is anyone adding a flipperzero to their toolkits

Interesting, i think it will the good place to share each other the link you are all using to call third party applications ? fell free to put you succes url here : Crestron App : crestron-app://

Currently have a few systems running with the Cisco 4.0 modules from the Market place. With mixed results. [equip: 4 Codec Pro's] I did not have time to integrate the "pop-up's" that are displayed on

Do you want to change the provider mode or just go in and out of device mode for BYOD with the Poly camera/mic/etc...? Changing providers always reboots because it is changing the underlying setup for

It is only Ubiquiti's Unifi line that cannot handle multicast traffic. I have several NVX installations using Ubiquiti's Edge line with no issues.? I would imagine that NAX traffic would not be quite

A lot more switch configuration need to be done for multicast streaming to occur. Ubiquity switches cannot handle this type of traffic properly. Check the crestron help file on proper switch?

Hi Daniel, If it is a codec room kit, I am testing with Cisco room devices 4.0 and with the 2.3.9 module, some things work in one and others in the other

I believe there is. Which module are you using to control the webex device? (guessing it's a codec). If you are using the Cisco Room Devices 4.0, I believe that device has "message center" or "alert

Is there a way to change the HDCP support of DM chassis input cards via Text Console? I know DMHDCPdisplay shows the current HDCP info per card, but is there a way to use text console to turn support

Hello Daniel, I mean that when you start a webex meeting through the cisco panel, some pop ups appear asking if you are a host or guest to continue. I am reviewing the api guide to see if I find

What do you mean by "reflect"? Do you want the popups to show up on a panel? I am also curious, but I am hoping to close out the prompts. Hope we both can get some info.

BR 5812 = SIMPL - CCD Display Module - v1.14-1.19 allocating NVRAM and unable to compile when using multiple instances BR 5812 solved noting SIMPL+ calls storing data have been removed from v2.x

Sorry for the off topic post.? ?Let me know if you have one you're not using. Thanks Karl