开云体育

Unfortunately I don't have a solution at the moment, but I can confirm that I have the same issue on two separate Windows 11 machines.? In my case, I could open VS2008 S# projects perfectly fine last

Are you somehow executing events inside a Crestron program or is this all outside Crestron using Homekit automations?

Theres a few records in the Error log.

I asked TB this question last month when I was preparing to work on my exam. Their answer: "YES, you need a processor to test your work". ANY 3 series is OK. Do not worry about changing the processor

I hadn't had to touch any of my S# code in a while and today when I tried to open a file I received the following error: Could not load file or assembly "System.Runtime.Serialization; Version=3.0.0.0,

"I do not think that word means what you think it means..." - Inigo Montoya

Anything in the log before you reboot? -- Lincoln King-Cliby, CTS, DMC-E-4K/T/D Commercial Market Director Sr. Systems Architect | Crestron Certified Master Programmer (Diamond) ControlWorks

I having problems with a MC4 too. It has a very simple program, one? D3Pro in the Slot 01 and a Simpl-W in the Slot 02 controling a couple of TV and 4 diffrent Sonos devices. They have an EISC

Hi Lucian Do you still have this module? and would you be willing to share it with me if you do? Thanks

In my experience most fans can have their canopy controllers replaced with Crestron’s version. I believe it’s a clc-fandelv-ex but would of course also require a gateway if there isn’t already

You could spin up a copy of Crestron VC-4 as a virtual machine and use it to test. Thou you need the current beta to test simplwindows based programs with it.

Hi, Just curious if anyone knows what the following error means: 13. Error: TLDM.exe # 2022-04-29 20:34:05? # CTHALUSBHIDSlotDeviceDriver:SendCresnetPacketToDriver - NumofBytesReceived-27 or

Inconceivable! :-)

Has anyone been able to control one of the Monte Carlo Fans (Model No.?3MAVR60D)?? I checked with Bond Bridge but it is not compatible.? Thank you so much for any suggestions you may have.

Yes I think you would need a Crestron to test your code on.? If you are just doing SIMPL or simple SIMPL+ stuff, that could even be a series 2 processor.? I have purchased several Crestron

Here's a very stripped down example I provided a little while ago, showing the basics of driving required input values on the CCD Disp Eth v1.19 module after inspecting the driver .dat files in

I don't remember what kind it was. This was probably 8 years ago for another company. I'll have to dig through my archives to find the model of it. It was for an automated shower valve system that had

Thanks, Brian! Which Kohler products were you able to integrate? and how did it go?

I can't speak to CCD control, but I've very successfully IP-controlled Sony TVs with the 'Sony 2014 Bravia 2014 v1.0' module in the CresDB. I haven't used it for internal App control, but their is a

No, we wouldn't be out of a job...we'd just be able to finish projects and move on to the next without always being in a feedback loop!...:)